Home Theater Direct (Htd) - Universal Devices ISY-994i User Manual

20.3.7

Home Theater Direct (HTD)

Thank you pikach for providing these instructions!
• Find out the IP address and port (should be 10006) of your GW1. (you should know
that if you set up correctly the HTD app)
• In the ISY go to Configuration, Networking, Network Resources and click Add
• By protocol Information, select TCP, Host is your IP address, port is port, and by
mode select Binary
• The converted HEX codes go into Body box, for example all zones on you type
2;0;0;4;85;91 click on save
o You can find converted Hex Codes for HTD Here and for MC66 Here
o And Here's the link to the discussion on the forum:
devices.com/topic/12947-htd-home-theater-direct-integration/
20.3.8 Sonos
Communicate with your Sonos through ISY network resources.
Export Files
http://www.universal-devices.com/networkresources/audio/Sonos.zip
contains commands used to control Sonos.
http://forum.universal-devices.com/topic/14127-more-sonos-integration/
Comprehensive guide for Sonos Integration.
Forum - Discussion forum for Sonos integration:
devices.com/topic/11716-insteon-and-sonos-with-isy-994i
With many thanks to dstanley.
20.3.9 Sonos by jonathanud
Export Files
http://www.universal-devices.com/networkresources/audio/Sonos-NR.zip
file contains commands used to control Sonos.
Forum - Discussion forum for Sonos integration:
devices.com/topic/11716-insteon-and-sonos-with-isy-994i
http://forum.universal-
http://forum.universal-
http://forum.universal-
- This file
-
- This
Page | 532