Menu Functions - Silvercrest SPDP 18 A1 Operating Instructions Manual

Repeat section
♦ During playback press the A-B button
the section that you want to repeat.
screen.
♦ Press button A-B a second time to set the end of the section.
The A-B symbol appears permanently on the screen and the
specified section is repeated endlessly.
♦ Press the A-B button again to return to normal playback.
Programming the playback order of tracks
With this programming function you can play up to 20 chapters (DVD)
or tracks (audio CD) in an order of your choosing. This function is not
available for MP3 media.
♦ Press the PROGRAM button
appears on the screen.
01 T T: CH:
T T: CH:
02
03 T T: CH:
T T: CH:
04
T T: CH:
05
Exit
♦ Enter the desired track (TT) for program position 1 using the num-
bers on the numeric keypad
10+ repeatedly for the tens, then a numeric key for the second
digit.
♦ Enter the desired chapter (CH) for program position 1 using the
numbers on the numeric keypad
♦ After input, the cursor jumps to the next program position.
♦ Enter additional program positions in the same way. To enter 10
additional program positions, move the cursor to the "Next
entry at the bottom of the menu using the navigation keys
and confirm with the ENTER button
♦ If you select the "Exit" entry at the bottom of the menu, the pro-
gramming function is aborted. All settings will be lost.
SPDP 18 A1
to set the beginning of
A is displayed on the
. A table with 10 program positions
T T: CH:
06
T T: CH:
07
08 T T: CH:
T T: CH:
09
T T: CH:
10
Next
. To enter two-digit numbers press
.
.
Starting a programmed playback sequence
As soon as the first program position has been entered, the word
"Start" appears at the bottom of the menu.
♦ Use the navigation keys
and press the PLAY/PAUSE
The preprogrammed playback sequence starts and "Program" is
permanently displayed on the screen during playback.
♦ Use the PROGRAM button
with the program positions again.
♦ To stop playback and clear the programmed playback order, press
the STOP button
At the end of the programmed playback sequence, the DVD player A
automatically switches to stop mode. The previously programmed
playback sequence is not saved.
Opening the DVD menu
Many DVD films contain a main menu on the disc with several options
besides the option to play the main film, e.g. playback of bonus
material.
Please note that it depends on the DVD which menu is displayed when
a key is pressed.
♦ Pressing the MENU button
the DVD.
♦ Pressing the TITLE button

Menu functions

Navigating the menus
♦ Press the SETUP button
Setup page appears.
Use the navigation keys
adjust all the settings in the menu.
–
Use the navigation keys
"
yellow marking under the corresponding menu symbol.
–
Use the navigation keys
moving the green bar over the item.
–
Use the navigation key to switch to the submenu of an entry
and the navigation key to go back one menu level.
–
To confirm a selection, press the ENTER button
–
To exit the setup menu, press the SETUP button
to move the cursor to "Start"
button or ENTER
to call up and change the table
twice.
usually calls up the main menu of
usually opens the DVD title menu.
to enter the setup menu. The General
and the ENTER button
to select a menu by moving the
to select an item in a menu by
GB │ IE │ NI
.
to
.
.
│ 13
■