Rohde & Schwarz ESW Series User Manual page 597

®
R&S ESW
HCOPy:DESTination<1|2> <arg0>
This command selects the destination of a print job.
Suffix:
<1|2>
Parameters:
<arg0>
Manual operation:
HCOPy:DEVice:COLor <State>
This command turns color printing on and off.
Parameters:
<State>
Example:
HCOPy:DEVice:LANGuage<1|2> <arg0>
This command selects the file format for a print job.
Suffix:
<1|2>
Parameters:
<arg0>
User Manual 1177.6298.02 ─ 08
Remote Commands in the Receiver Application
.
Printing device.
'MMEM'
Sends the hardcopy to a file.
You can select the file name with MMEMory:NAME.
You can select the file format with
LANGuage<1|2>.
'SYST:COMM:PRIN'
Sends the hardcopy to a printer.
You can select the printer with
PRINter:SELect<1|2>
'SYST:COMM:CLIP'
Sends the hardcopy to the clipboard.
The format should be WEMF.
*RST: 'SYST:COMM:CLIP'
See "Destination" on page 284
ON | OFF | 0 | 1
ON | 1
Color printing
OFF | 0
Black and white printing
*RST: 1
HCOP:DEV:COL ON
.
1|2
Printing device.
WMF | GDI | EWMF | BMP | PNG | JPEG | JPG | PDF | SVG |
DOC | RTF
Data Management
HCOPy:DEVice:
SYSTem:COMMunicate:
.
597