Whale BE9003 Instruction And Installation Manual

Bilge Accessories
Bilge Accessories
Complete Your System
Fit Whale high quality pumps and accessories to ensure long term reliability throughout your bilge waste
®
system. Whale switches, diverter valves, and pipework connections are designed and manufactured with
highest quality at heart. Combine these accessories with your Whale bilge pumps for reliability and durability.
Need specific advice on your system? Contact our technical team at Whale Support
See below for a full list of accessories
Electric Bilge Switches
NEW Electric Field Sensor Range
• Electric field sensor automatically senses water levels
and switches on the bilge pumps
• Nylon material - withstands high temperatures
• Automatically switches on when 51mm (2") of water is sensed and turns off
when water drops below 13mm (½")
• BE9006 model - built in 30 second off delay for efficient operation, prevents
cycle in small sump installations or enables lower drain than 13mm (
Model Specifications
Model Electric Field Sensor Switch
Product Number BE9003
Voltage D.C.
Current
Residual Current
Suitable for Orca and Supersub standard submersible ranges – pages 26 and 28
Float Switch
Floatswitch Ideal for use with Electric Bilge Pumps
• Environmentally friendly - no toxic mercury
• Easy to install mounted on either horizontal or vertical surface (e.g. bulkhead or hull)
• Suitable for installations where amp draw is up to 15 amps
• Compact design
• Can be used as a high water bilge alarm (when vertically mounted)
Model Specifications
Model Whale Float Switch
Product No.
Voltage D.C. 12V d.c. or 24V d.c.
Current Suitable for up to 15 Amps
Suitable for Orca and Supersub Standard Submersible ranges see pages 26 and 28
Note: These specifications are retail items only.
For details of our bulk pack range for boat builders and wholesalers - contact Whale Support.
48 Manual Bilge 48
/ ")
1
2
Electric Field Sensor Switch
with 30 second time delay
BE9006
12V d.c. or 24V d.c.
Suitable for up to 20 Amps
0.008 Amp
BE9002
Easy wiring
- two colour coded wires
for easy installation
Easy installations
- side or base mounting
ears to suit your installation
Side View
Side View
BE9003 / BE9006
Testing
- two test circle to
ensure activation
BE9002
Plan View
Schiffsausrüster
Tel.: +49 ( 0 ) 40 - 88 90 100
www.toplicht.de