INTRODUCTION Congratulations! NOW take a moment to enter the model, Thank you for choosing Northstar. We are serial number and the date of purchase for confident this equipment will meet your your Bin Trailer in the space provided below. requirements in terms of quality, performance and reliability.
Page 3
Be observant and safety minded. Recognize and correct or avoid hazardous conditions before an accident can happen. Practicing simple fundamental safety rules can prevent most accidents. 1. Read and understand the implement and tractor owner’s manuals before operating. 2. Be sure safety decals and reflectors are clean and in place. 3.
Page 4
SAFETY/MAINTENANCE DECALS The safety of the operator was a prime consideration in the design of the Northstar Bin Trailer. The following decals and their location are shown. Keep decals clean and replace them immediately if they are missing. Contact your Dealer for replacements.
MAINTENANCE DAILY 1. Visually check for loose bolts or nuts. 2. Oil chain and grease tongue pivot pins liberally. 3. Grease 2" ball. WEEKLY 1. Check for loose sprockets. Retighten if necessary. 2. Tighten main pick-up chain if necessary. Note: if tightening is necessary, the short drive chain must be loosened first and then retightened.
Your Bin Trailer is supplied with Safeway or Pioneer tips. These will attach to most tractor hydraulic systems. Contact your Northstar Attachments Dealer if other style of tips are necessary. (Note: always clean tips of dirt and oil before installing.) The hydraulic valve is set to operate with an open center hydraulic system.
Page 10
BIN STOP ASSEMBLY ITEM PART NO DESCRIPTION TR-737 Turnbuckle TR-2735 RH Thread Rod and Eye Turnbuckle TR-734 Bronze Bushing TR-732-RH Right Hand Actuator Arm TR-732-LH Left Hand Actuator Arm (not shown) TR-738 Pivot Block TR-723 Spring TR-702 ½ Chain Link TR-2738 Slide Bushing Front TR-2738-1...