Related Manuals for SEW-Eurodrive BMG T Series
Summary of Contents for SEW-Eurodrive BMG T Series
- Page 1 Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services GA253000 BMG..T Double Disc Brake for Stage Applications Edition 01/2006 perating nstructions 11386614 / EN...
- Page 2 SEW-EURODRIVE – Driving the world...
-
Page 3: Table Of Contents
Contents Important Notes....................4 Safety and warning instructions ..............4 Safety Notes ...................... 5 Certificate......................6 Structure of the BMG..T Stage Brake .............. 7 Basic structure ..................7 Unit designation ..................8 Installation/Startup.................... 9 Mechanical installation................9 Electrical installation ................. 9 Startup ...................... -
Page 4: Important Notes
Important Notes Safety and warning instructions Important Notes Operating Instructions Safety and warning instructions Always follow the safety and warning notes in this publication. Electrical hazard Possible consequences: Severe or fatal injuries. Hazard Possible consequences: Severe or fatal injuries. Hazardous situation Possible consequences: Slight or minor injuries. -
Page 5: Safety Notes
Safety Notes Safety and warning instructions Safety Notes • The requirements for the emergency stop relay and the permitted circuit variants are specified in detail in the following sections and must be strictly observed. • The system/machine manufacturer must perform a system/machine-specific risk analysis. -
Page 6: Certificate
Certificate Safety and warning instructions Certificate The following certification is available for the BMG..T double disc brake for stage appli- cations: • Product certificate of the Rheinisch-Westfälischer Technische Überwachungs- Verein e.V (RW TÜV) The certification reports accompanying the respective certificates must be observed. The conditions are listed in this publication. -
Page 7: Structure Of The Bmg..t Stage Brake
Structure of the BMG..T Stage Brake Basic structure Structure of the BMG..T Stage Brake Basic structure The following sectional view is intended to explain the general structure. Its only purpose is to facilitate the assignment of components to the spare parts lists. Discrepancies may occur depending on the brake size and version! 54283AXX Figure 2: Basic structure of the BMG..T brake... -
Page 8: Unit Designation
Structure of the BMG..T Stage Brake Unit designation Unit designation The following motor/brake combinations are permitted for stage applications: Brake type For motor size Rated braking torque [Nm] BMG4T DT90 32 (2 x 16) 20 (2 x 10) 40 (2 x 20) DV100 32 (2 x 16) 20 (2 x 10) -
Page 9: Installation/Startup
Installation/Startup Mechanical installation Installation/Startup Mechanical installation • In normal operation, the manual release lever for the brake must not be attached. This prevents the brake from being released unintentionally. • The drive may only be installed when • The drive is undamaged (no damage caused by transportation or storage) •... -
Page 10: Inspection/Maintenance
Inspection/Maintenance Inspection and maintenance periods Inspection/Maintenance • Use only genuine spare parts in accordance with the valid parts list! • Always install a new brake controller at the same time as replacing the brake coil. • Motors can become very hot during operation – danger of burns! •... -
Page 11: Checking The Dual Circuit Braking Function
Inspection/Maintenance Checking the dual circuit braking function Checking the dual circuit braking function The BMG..T brakes can be checked both statically and dynamically. A static check may not be suitable for some applications (due to the higher reference torque). The system operator determines the procedure that is to be used and how often a check is to be per- formed (see the inspection and maintenance periods). - Page 12 Inspection/Maintenance Checking the dual circuit braking function Dynamic check in The BMG..T brakes have a dual circuit braking function. If one brake circuit fails, the accordance with other is able to hold the load. The following section describes how to check the DIN 56950 effectiveness of this backup brake system.
- Page 13 Inspection/Maintenance Checking the dual circuit braking function 58038AXX Figure 3: Checking the dual circuit brake function with distance blocks [1] Distance blocks (3x) [2] Air gap [3] Adjusting screw [4] Brake disc not in the power flow [5] Brake disc in the power flow Operating Instructions –...
-
Page 14: Customer Service
Inspection/Maintenance Customer service Static check Brakes in the BMG..T series have a dual circuit braking function. The permitted load torque during operation is much lower than the rated braking torque. Before performing the static check described here, you must ensure that the transmis- sion components are strong enough to cope with the test ratings. -
Page 15: Technical Data
Technical Data BMG..T braking torque Technical Data BMG..T braking torque Brake type For motor Working air gap Braking torque settings size nom./ nom./ Rated Type and Order numbers for min. max. braking number of brake springs torque brake springs [mm] [mm] [Nm] Stan-... -
Page 16: Brake Controllers
Technical Data Brake controllers Brake controllers SEW-EURODRIVE stipulates the following brake controllers as standard in combination with brakes from the BMG..T series for installation in terminal boxes: BMG4T BMG8T BMG15T BMG 32T/ BMG62T AC supply BG/BGE 24 V supply BS/BSG If you want to install the brake controller in a switch cabinet, SEW-EURODRIVE stipulates the following brake controllers in combination with brakes in the BMG..T series:... - Page 17 16, rue des Frères Zaghnoun Fax +213 21 8222-84 Bellevue El-Harrach 16200 Alger Argentina Assembly Buenos Aires SEW EURODRIVE ARGENTINA S.A. Tel. +54 3327 4572-84 Sales Centro Industrial Garin, Lote 35 Fax +54 3327 4572-21 Service Ruta Panamericana Km 37,5 sewar@sew-eurodrive.com.ar...
- Page 18 Address List Australia Assembly Melbourne SEW-EURODRIVE PTY. LTD. Tel. +61 3 9933-1000 Sales 27 Beverage Drive Fax +61 3 9933-1003 Service Tullamarine, Victoria 3043 http://www.sew-eurodrive.com.au enquires@sew-eurodrive.com.au Sydney SEW-EURODRIVE PTY. LTD. Tel. +61 2 9725-9900 9, Sleigh Place, Wetherill Park Fax +61 2 9725-9905 New South Wales, 2164 enquires@sew-eurodrive.com.au Austria...
- Page 19 Address List China Assembly Suzhou SEW-EURODRIVE (Suzhou) Co., Ltd. Tel. +86 512 62581781 Sales 333, Suhong Middle Road Fax +86 512 62581783 Service Suzhou Industrial Park suzhou@sew.com.cn Jiangsu Province, 215021 P. R. China Additional addresses for service in China provided on request! Colombia Assembly Bogotá...
- Page 20 Address List Hungary Sales Budapest SEW-EURODRIVE Kft. Tel. +36 1 437 06-58 Service H-1037 Budapest Fax +36 1 437 06-50 Kunigunda u. 18 office@sew-eurodrive.hu India Assembly Baroda SEW-EURODRIVE India Pvt. Ltd. Tel. +91 265 2831086 Sales Plot No. 4, Gidc Fax +91 265 2831087 Service Por Ramangamdi ·...
- Page 21 Address List Luxembourg Assembly Brüssel CARON-VECTOR S.A. Tel. +32 10 231-311 Sales Avenue Eiffel 5 Fax +32 10 231-336 Service B-1300 Wavre http://www.caron-vector.be info@caron-vector.be Malaysia Assembly Johore SEW-EURODRIVE SDN BHD Tel. +60 7 3549409 Sales No. 95, Jalan Seroja 39, Taman Johor Jaya Fax +60 7 3541404 Service 81000 Johor Bahru, Johor...
- Page 22 Address List Romania Sales Bucuresti Sialco Trading SRL Tel. +40 21 230-1328 Service str. Madrid nr.4 Fax +40 21 230-7170 011785 Bucuresti sialco@sialco.ro Russia Assembly St. Petersburg ZAO SEW-EURODRIVE Tel. +7 812 3332522 +7 812 5357142 Sales P.O. Box 36 Fax +7 812 3332523 Service 195220 St.
- Page 23 Address List Sweden Assembly Jönköping SEW-EURODRIVE AB Tel. +46 36 3442-00 Sales Gnejsvägen 6-8 Fax +46 36 3442-80 Service S-55303 Jönköping http://www.sew-eurodrive.se Box 3100 S-55003 Jönköping info@sew-eurodrive.se Switzerland Assembly Basel Alfred lmhof A.G. Tel. +41 61 417 1717 Sales Jurastrasse 10 Fax +41 61 417 1700 Service CH-4142 Münchenstein bei Basel...
- Page 27 SEW-EURODRIVE – Driving the world...
- Page 28 Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation \ Services How we’re driving the world With people who With comprehensive With uncompromising think fast and With a worldwide With drives and controls knowledge in virtually quality that reduces the develop the service network that is that automatically...
Need help?
Do you have a question about the BMG T Series and is the answer not in the manual?
Questions and answers