Specifications; General Specifications; Performance Specifications; Power Supply Specifications - Mitsubishi Electric MELIPC MI3321G-W Safety Manuallines

Table of Contents

Advertisement

3

SPECIFICATIONS

3.1

General Specifications

Item
Operating ambient temperature
Température ambiante de fonctionnement
Storage ambient temperature
Operating ambient humidity
Storage ambient humidity
Vibration
Random vibration
resistance
Shock resistant
Operating atmosphere
*1
Overvoltage category
*2
Pollution level
Cooling method
Grounding
*1 This indicates the power distribution section to which the product is assumed to be connected, between the public power grid and the machinery within the
premises.
Category II applies to equipment that is supplied with power from fixed facilities.
The withstand surge voltage is 2500 V for the equipment with the rated voltage up to 300 V.
*2 This indicates the extent to which conductive substances are found in the operating environment of the product.
Pollution level 2 indicates an environment in which normally only nonconductive pollution occurs and the temporary conductivity caused by condensation is to be
expected.
3.2

Performance specifications

Item
External dimensions
Panel cutting dimensions
Weight
For the performance specifications other than those mentioned above, refer to the MELIPC MI3000 User's Manual.
3.3

Power supply specifications

The following shows the power supply specifications of this product.
Item
Power supply voltage
Power consumption
Under the maximum load
Stand alone
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(for terminal block terminal screws)
9
Specifications
MI3321G-W
0 to 55°C
0 à 55 °C
-20 to 60°C
10% RH to 90% RH, non-condensing
10% RH to 90% RH, non-condensing
IEC60068-2-64
5 to 500 Hz, 1 hour per axis (X, Y, and Z)
3Grms
IEC60068-2-27
10 G, half-sine wave, 11 msec
Neither greasy fumes, corrosive gas, flammable gas, excessive conductive dust, nor direct sunlight (as well as at
storage)
II or less
2 or less
Self-cooling
Grounding (ground resistance: 100 Ω or less, cross-sectional area of the ground cable: 2.0 mm
Specifications
MI3321G-W
349.8(13.77)(H) × 558.4(21.98)(W) × 88.8(3.50)(D)
mm(inch)
341.8(13.46)(H) × 550.3(21.67)(W) mm(inch)
9.8(21.6) kg(lb)
Specifications
MI3321G-W
24 V DC (+20%, -20%)
90 W
27 W
Single wiring (single wire, stranded wire): 0.2 to 2.5 mm
Rod terminal with an insulation sleeve: 0.25 to 2.5 mm
Double wiring (single wire, stranded wire): 0.2 to 1.5 mm
DN00508D (AWG20), DN00708D (AWG18), DN01508D (AWG16) (manufactured by DINKLE)
Crimp tool: DNT13-0101 (manufactured by DINKLE)
0.20 N•m (M2.5)
MI3315G-W
MI3315G-W
307.3(12.10) (H) × 383.2(15.09)(W) × 86(3.39)(D)
mm(inch)
298.5(11.75)(H) × 374.5(14.74)(W) mm(inch)
7.0(15.4) kg(lb)
MI3315G-W
2
(AWG24 to AWG14)
2
(AWG22 to AWG14)
2
(AWG24 to AWG16)
2
or more)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melipc mi3315g-w

Table of Contents