Wall Mount A Cap L Using A Flat Mounting Bracket Kit - CommScope Era Installation Manual

Mount the Fiber CAP L
Wall Mount Orientation for a CAP L with a Fan Kit—To allow for optimal access to the CAP L cables, it
•
is recommended that a Fiber CAP L with the Fan Kit option be mounted with the ANT ports are pointing
to the left; see Figure
ANT connectors
poin ng to the le
Figure 10. Mounting Orientation for a CAP L with the Optional Fan Kit (Flat Mounting Bracket Shown)
Mounting requirements for flat surfaces are described in
Ceiling-mount requirements are described in

Wall Mount a CAP L Using a Flat Mounting Bracket Kit

Use "Plan and Prepare for a Fiber CAP L Installation" on page 10
1
installation requirements, and to prepare for the installation.
Refer to and observe all cautions listed in
2
Follow the steps in
3
Refer to "Mounting Orientation for Wall Mounts" on page 29
4
Fiber CAP L.
™
CommScope Era Fiber Low Power Carrier Access Point Installation Guide
Page 30
10.
"General Mounting Cautions" on page
"Attach the Flat Mounting Bracket Kit to the CAP L" on page
"Flat-Surface Mount a CAP L" on page
"Ceiling Mount a CAP L with a Fan Kit" on page
to identify the installation site and
to determine the mounting orientation of the
27.
54.
24.
26.
M0201ANC_uc
© June 2019 CommScope, Inc.