11
MAINTANENCE
If water flow rate is lower than stated, flow regulator might be clogged by debris in the water lines.
TO REPLACE FLOW REGULATOR
• Turn water supplies off.
• Use TOOL PROVIDED (1) to loosen handle ring. Use hex key to loosen handle set screw.
Pull handle off. Figure A.
• Use TOOL PROVIDED (2) to remove cartridge. Figure B.
• Push the inlet hoses up to remove the manifold from faucet. Figure C.
• Use hex key to remove NUT (3). Figure C.
1
• Replace FLOW REGULATOR (4) with new one. Figure C.
• Follow the above steps in reverse to install faucet components.
2
Figure A.
4
3
Figure B.
Figure C.
12
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
M965706 Rev. 1.0 (3/17)
- 6 -
Need help?
Do you have a question about the Keefe D3510415C and is the answer not in the manual?
Questions and answers