Display Values For A Total System In The 'Day / Year / Total' Display Modes - Fronius DL Operating Instructions Manual

Display values for The Fronius Personal Display DL can show the following power data in the 'Day,' 'Year' and
a total system in 'Total' display modes for a total system:
the 'Day / Year /
Total' display
modes
Due to the variety of different monitoring systems, there can be deviations between the
readings of other metering instruments and the readings from the inverter. For determin-
ing the energy supplied to the grid, only the readings of the calibrated meter supplied by
the electric utility company are relevant.
As was the case for the output energy, readings may differ from those of other instru-
ments.
'The Setup menu' section describes how to set the currency and rate for the output ener-
gy. The factory setting depends on the respective country-specific setting.
CO
CO
(LB / T; T = tons)
The area for unit display switches between 'LB' or 'T' and 'CO2.'
The CO
generation of the same amount of electricity in a combustion power plant.
The factory setting is 1.3 lb / kWh.
28
reduction
2
emissions saved during the monitored period
2
meter gives an indication of CO
2
Output energy
Energy fed into the grid over the period of
time in question (kWh / MWh)
Yield
Amount of money earned during the peri-
od of time in question (currency can be se-
lected in the Setup menu)
emissions that would be released during the
2