Related Manuals for Swegon GOLD RX/HC Series
Summary of Contents for Swegon GOLD RX/HC Series
- Page 1 GB.RXHCF.191011 Reversible heat pump GOLD RX/HC Installation and Maintenance Instructions Sizes 011-080 GOLD RX/HC The document was originally written in Swedish.
-
Page 2: Table Of Contents
8.2 Leakage Tracing ..........14 9. Dimensions ........... 15 10. General technical data ....... 18 11. Wiring diagram ........18 12. Declaration of Conformity ....19 12.1 Sizes 011-020 ..........19 12.1 Sizes 025-080 ..........20 www.swegon.com We reserve the right to alter specifications. -
Page 3: Safety Instructions
Other service work in the unit should only be performed the reversible heat pump. by service personnel trained by Swegon. Ensure that the RX/HC is shut off by stopping the air han- dling unit or by temporarily shutting off the RX/HC via the 1.5 Decals... -
Page 4: Overview
The evaporator and condenser consist of copper tubes 14001 and profiled aluminium fins. Swegon AB works to a certified quality system that con- RX/HC is test run prior to delivery. forms to ISO 9001 standard and a certified Environmental Management System that conforms to ISO 14001. -
Page 5: Basic Function Diagram
HP, service outlet in RX section Electronic expansion valve Fluid, service outlet in RX section Shut-off valve For a description of the control functionality, see the function guide reversible heat pump RX/HC. www.swegon.com We reserve the right to alter specifications. -
Page 6: Size 035
HP, service outlet in RX section Electronic expansion valve Fluid, service outlet in RX section Shut-off valve Solenoid valve For a description of the control functionality, see the function guide reversible heat pump RX/HC. www.swegon.com We reserve the right to alter specifications. -
Page 7: Size 040-080
HP, service outlet in RX section Electronic expansion valve Fluid, service outlet in RX section Shut-off valve Solenoid valve For a description of the control functionality, see the function guide reversible heat pump RX/HC. www.swegon.com We reserve the right to alter specifications. -
Page 8: Installation
50 mm to provide space for the water trap on the lower level. Adjustable support feet (accessory) can be appropriately fitted to the base beams for this purpose. www.swegon.com We reserve the right to alter specifications. -
Page 9: Splitting/Installation Of Air Handling Unit Sections
The refrigerant pipes are connectors, see the separate installation instruction for placed on the top edge of the upper level with the supply air fan on the GOLD. upper level, see dashed lines. www.swegon.com We reserve the right to alter specifications. -
Page 10: Power Connection
5-core system, 400 V ±10%. Also see section 10 Technical data. Possible locations of the connection hood RX/HC Dismantle the connec- tion hood to RX/HC Connect the incoming power supply to the safety switch www.swegon.com We reserve the right to alter specifications. - Page 11 The wiring terminal for incoming earth is situated right next to the safety switch. 5-core system, 400 V ±10%. Also see section 10 Technical data. The power supply is con- nected here Factory-fitted cables www.swegon.com We reserve the right to alter specifications.
-
Page 12: Commissioning / Calibration
The phase sequence is correct when LED 1 is lit. The voltage is connected when LED 2 is lit. 6. ALARMS For a description of the alarms, see the GOLD Manual for Alarms and Information Messages. www.swegon.com We reserve the right to alter specifications. -
Page 13: Maintenance
Obligation to report Important: Must be carried out according to the F-Gas Regulation EU/517/2014 and associated local legislation. Contact Swegon Service in the event of leakage of refrigerant. 7.4 Service Only service personnel trained by Swegon should be per- mitted to modify the chiller. -
Page 14: Trouble Shooting And Leakage Tracing
NOTE! Maintenance work in the refrigerant system is per- mitted to be carried out only by an accredited inspectorate (a company with requisite authorisation). www.swegon.com We reserve the right to alter specifications. -
Page 15: Dimensions
The AHU can also be supplied with full face end connection panel (accessory). Size Weight, kg 934-1062 757,5 1400 1695 1000 1551 1154 3210 757,5 1400 1695 1000 1551 1154 3210 964-1112 www.swegon.com We reserve the right to alter specifications. - Page 16 The AHU can also be supplied with full face end connection panel (accessory). Size Weight, kg 1664-1894 1038.5 1990 1695 1400 2159 1744 3772 1038.5 1990 1695 1400 2159 1744 3772 1740-1988 www.swegon.com We reserve the right to alter specifications.
- Page 17 The AHU can also be supplied with full face end connection panel (accessory). Size Weight, kg 1273,5 2637 1815 1000 1800 2640 418,5 4362 3322-3592 3426-3732 1273,5 2637 1815 1000 1800 2640 418,5 4362 www.swegon.com We reserve the right to alter specifications.
-
Page 18: General Technical Data
Heating capacity: rotating heat exchange / coil HC. Sizing For correct sizing, we refer to our ProUnit air handling unit selection program AHU Design. 11. WIRING DIAGRAM For the wiring diagram, see the separate document. www.swegon.com We reserve the right to alter specifications. -
Page 19: Declaration Of Conformity
EC DECLARATION OF CONFORMITY FOR THE MACHINERY Original Directive 2006/42/EC, Annex II 1A Manufacturer (and whenever applicable its authorized representative): Company: Swegon Operations AB Address: Box 300, SE-53523 Kvänum, Sweden Declares that: Type of machine: Air handling unit Machine No.:... -
Page 20: Sizes 025-080
EC DECLARATION OF CONFORMITY FOR THE MACHINERY Original Directive 2006/42/EC, Annex II 1A Manufacturer (and whenever applicable its authorized representative): Company: Swegon Operations AB Address: Box 300, SE-53523 Kvänum, Sweden Declares that: Type of machine: Air handling unit Machine No.:...
Need help?
Do you have a question about the GOLD RX/HC Series and is the answer not in the manual?
Questions and answers