Advertisement
Quick Links
Advertisement
Related Manuals for Enlaps Tikee PRO 2+
Summary of Contents for Enlaps Tikee PRO 2+
- Page 1 Quickstart guide Tikee PRO 2+...
- Page 2 Introduction This quick start guide is non exhaustive. Before using your Tikee, please read carefully all the safety precautions and https://enlaps.io/ instructions for use in the manual available at user-guide/?lang=en Follow us on...
- Page 3 Basics Content 1x Tikee PRO 2+ 1x Quick 1x Hexagon 1x Microfiber Start Guide wrench cloth Requirements A microSD card (not provided) is required to use your Tikee : - Compatible cards : microSDHC/ microSDXC. - Speed class : U1 or U3 - Capacity : 8 Go - up to 512 Go For the 4G connectivity: an activated microSIM (not provided) with a subscription adapted is required to upload data using 4G...
- Page 4 Overview Solar panel Anti-theft system Power button Micro SIM slot Press and hold for three Slot for micro SIM card seconds to power on/off Micro USB slot Trigger button Charge your Tikee Start or stop a pre-set (Micro USB cable not timelapse sequence provided) Power LED and trigger LED...
-
Page 5: Getting Started
Getting started 1. Remove the plastic film from the solar panel and charge the battery of your Tikee using a micro USB cable (not provided). Prior use, perform a full battery charge. (LED blinking blue once completely charged) 2. Create an account on our web application at my.tikee.io Tikee Remote Download the mobile app... - Page 6 4. Press 3 seconds the Power button to power on. LED starts blinking and then turns fixed. The color indicates battery level. To power off press and hold the power button for 3 seconds until the LED starts blinking. 5. Check bluetooth and location is on on your mobile phone/ta- Tikee Remote mobile blet.
- Page 7 7. Properly level your camera, horizontally and vertically. Frame your subject, to ensure a proper panorama stitching, avoid foreground object closer than 5m in the central aera. 8. Check the framing of your Tikee camera with the preview. Only available if Wifi or 4G connectivity is functional. Preview 9.
- Page 8 INTERVAL 1 MIN AND + LONG-TERM MODE Up to 24 hours between each shot for an event that can last for months or more. By default upload occurs each 25 images or at least once a day. Suggested use : site monitoring with 1 image every 15 minutes and automatic images send via network every 25 images.
- Page 9 10. Start a timelapse by clicking on Start recording from the Trigger button mobile app or pressing the on Tikee. The right LED blinks every 10 seconds. Timelapse will start at preset time. To stop ongoing recording sequence press 3 seconds the Trigger button again. You can view the status of your Tikee at any time from the screen in the mobile app Tikee Remote (close to your Tikee) or from...
- Page 10 ;) Want to know more? You can edit your timelapses and configure your Tikee remotely. Tutorials are available on the website at enlaps.io. If you have any questions please contact us at support@enlaps.fr or on Facebook.
Need help?
Do you have a question about the Tikee PRO 2+ and is the answer not in the manual?
Questions and answers