Related Manuals for EchoLife HG8145V
Summary of Contents for EchoLife HG8145V
- Page 1 EchoLife HG8145V GPON Terminal Instruction Version HG8145V 1. HG8145V Router power status 2. Internet connection Settings 3. WAN, Wireless Settings 4. Hardware Installations 5. Technical Specifications 6. Product Overview 7. Packing List...
-
Page 2: Indicator Status
1. HG8145V Router power status Status Indicator Status Description Steady green The terminal is powered on. POWER The power supply is cut off. The GPON terminal is prohibited by the upper-layer device, contact the service provider for help. Blinks twice... -
Page 3: Internet Connection Settings
2. Internet connection Settings There are 2 type to set the Internet connection Type 1. Shortcut Step 1 Open the Internet Explorer (IE) browser and enter http://192.168.1.1/3bb. Step 2 In the Quick Configuration page that is displayed, enter the username, password (for surf internet) and validate code. - Page 4 3. WAN , Wireless Settings 3.1 Configure IP Address of Network Card Configure TCP/IP properties of your network card to Obtain an IP address automatically from ONT, or set the IP address of the computer with the same network mask of the ONT. Then go to step 2. Web configuration Type 1. Shortcut to access the internet 3.2 Wireless Settings - Click...
-
Page 5: Hardware Installations
Before enabling the WPS encryption function of a GPON terminal, ensure that the function is set in the system software in advance. After successful setting, press the WPS switch for the settings to take effect. The connections between the HG8145V and other devices are shown as follows. -
Page 6: Technical Specifications
- System power supply: See the nameplate on the device. - Ambient temperature: 0ºC to +40ºC - Ambient humidity: 5%–95% (non-condensing) - GPON Terminal : HG8145V - Weight (Including the Power Adapter) : About 1500 g - Maximum System Power Consumption : ≤ 18.5 W 6.
Need help?
Do you have a question about the HG8145V and is the answer not in the manual?
Questions and answers
After reset on the HG8145V how do I login in on the available wifi networks of the HUAWEI
After resetting the EchoLife HG8145V, follow these steps to log in to the Wi-Fi network:
1. Ensure the WLAN function is enabled by pressing the WLAN switch if necessary.
2. Connect your device to the default Wi-Fi network (SSID) broadcasted by the HG8145V.
3. If needed, access the web configuration by setting your network card to obtain an IP address automatically or using a compatible IP address.
4. Open a web browser and log in to the router’s configuration page.
5. Navigate to WLAN settings.
6. Under 2.4G Basic Network Settings or 5G Basic Network Settings, ensure Enable WLAN is checked.
7. If required, update the SSID Name and WPA pre-shared key (password).
8. Save the settings and reconnect to the updated Wi-Fi network using the new credentials.
This answer is automatically generated