Onboard Serial Port 1 [3F8/Irq4]; Onboard Serial Port 2 [2F8/Irq4]; Uart Mode Select [Normal] - IEI Technology ROCKY-4786EVG User Manual

Disabled (D
EFAULT
Enabled

Onboard Serial Port 1 [3F8/IRQ4]

The Onboard Serial Port 1 option allows you to select the I/O address and IRQ for the
onboard serial port. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The options are listed below:
Disabled
3F8/IRQ4 (D
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto

Onboard Serial Port 2 [2F8/IRQ4]

The Onboard Serial Port 2 option allows you to select the I/O address and IRQ for the
onboard serial port. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The options are listed below:
Disabled
3F8/IRQ4
2F8/IRQ3 (D
3E8/IRQ4
2E8/IRQ3
Auto

UART Mode Select [Normal]

The UART Mode Select option allows you to select the UART mode for the system.
IrDA
ROCKY-4786EVG CPU Card
) Disable this option if you use an adapter for your FDDs
or if you have no FDDs connected
Select this option if FDDs are connected to the board
and will use the onboard FDD controller.
)
EFAULT
)
EFAULT
IrDA is set as the IR serial mode. If this option is
1-10
109
9