Engine Oil Change Reset; Instrument Cluster Display Main Menu - Fiat 500X 2019 Owner's Manual

112 GETTING TO KNOW YOUR INSTRUMENT PANEL
ZONE LOCATIONS
Zone 4
Zone 5
Zone 6
Telltales Bottom Left
Telltales Bottom Right

Engine Oil Change Reset

Your vehicle may be equipped with an engine oil change
indicator system. The "Change Engine Oil" message will
display in the instrument cluster display. The engine oil
change indicator system is duty cycle based, which means
the engine oil change interval may fluctuate, dependent
upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN position.
CONTENT
Audio Information
Browsing Arrows
Display Menu Titles
Speed Display
Trip
Fuel Economy
Turn By Turn Navigation
Odometer Reading
Cruise Control Speed Set
Speed Buzzer
Red
Yellow
To reset the oil change indicator system (after performing
the scheduled maintenance), refer to the following proce-
dure.
1. Turn the ignition switch to the ON position (do not start
the engine).
2. Fully push the accelerator pedal slowly, three times,
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Instrument Cluster Display Main Menu

The Main Menu is composed of several options that can be
selected using the control buttons above.
NOTE:
• The display mode of the menu items varies depending
on the type of display.
• For some items, a submenu is provided.
• In the Uconnect system, some items on the menu are not
shown on the instrument cluster display.