Line Card Leds; Expandable Cable Management Bracket - Dell Force10 E300 Installing And Maintaining

Table 7-1. RPM Front Panel and LED Descriptions (continued)
Section Label
PEM0, PEM1
LEDs
Primary LED Indicates that this RPM is the Primary RPM.
Reset Button
Status LED

Line Card LEDs

Line card LEDs are described in the documentation specific to each line card. Refer to the installation
documentation that came with the card for to understand LED appearance and meaning.

Expandable Cable Management Bracket

The E300 chassis cable management bracket
auxiliary cables to RPMs. Space is provided for approximately 48 CAT5 cables per line card slot. In the
standard configuration, wire-ties are used to secure the cabling.
34 | Installing RPMs, Line Cards, and SFMs
Description
Not Supported
Green: primary
Unlit: standby
To reset the RPM, depress the button by inserting a small object, such as a pen tip.
Green: operational
Amber: fault detected
Flashing green: booting
Unlit: in standby mode or power is off
(Figure 7-2) manages your copper, fiber optic line cards and