Table of Contents
Advertisement
Quick Links
KIT INCLUDES:
Drawer box x1
Bracket A x2
478-9804
Drawer box cover
cap x2
478-9830
To find all Klëarvue Cabinetry
MEDIUM DRAWER KIT
Instructions for SKUs: 478-3822, 478-3824
Rail adapter x2
478-9829
Left glide x1
478-9810
Bumper x2
478-9833
®
installation instructions and installation videos, visit www.klearvuecabinetry.com.
1/4" x 1/2"
3/16" x 1-3/16"
Euro screw x12
Long screw x1
478-9835
Right glide x1
478-9811
Drawer support
bracket x1
478-9831
1
3/16" x 5/8"
Short screw x3
478-9832
Left top rail
Right top rail
x1
478-9824
Drawer back
x1
478-9803
x1
478-9825
Advertisement
Table of Contents
Related Manuals for Klëarvue Cabinetry 478-3822
Summary of Contents for Klëarvue Cabinetry 478-3822
- Page 1 MEDIUM DRAWER KIT Instructions for SKUs: 478-3822, 478-3824 KIT INCLUDES: 1/4" x 1/2" 3/16" x 1-3/16" 3/16" x 5/8" Euro screw x12 Long screw x1 Rail adapter x2 Short screw x3 478-9835 478-9832 Drawer box x1 478-9829 478-9803 Left top rail...
- Page 2 STEP 1: • Install bracket A (478-9804) to the back of the drawer front. Be sure that the tab of the bracket with the two holes is facing toward the bottom of the drawer front, as pictured below. • Line up the holes on the bracket with the pre-drilled holes on the drawer front and secure with the euro screws (478-9835) as shown in the illustration.
- Page 3 STEP 3: • Install the long screw (478-9832) through the back of the drawer box into the drawer bottom. This helps to add stability to your drawer kit. STEP 4: • Attach the drawer front to the drawer box by lining up the brackets with the slots in the drawer box. Push until you hear a “click”...
- Page 4 STEP 5: • Line up the back of the side rail (478-9824/478-9825) with the back of the drawer. To attach the side rail and drawer together, push into place. STEP 6: • Insert the cylinder end of the side rail into the opening of the rail adapter. If the cylinder does not perfectly line up with the opening of the rail adapter, you can adjust how far the cylinder protrudes by rotating it with your finder.
- Page 5 STEP 7: • Turn the drawer box upside down and mark the center of the drawer front. • Use a center punch to make an indent within the three moulded holes on the bracket as shown in the illustration. STEP 8: •...
- Page 6 STEP 9: • For the installation location of the drawer glides, reference the “Drawer Configuration Guide” that was packaged with your drawer kit. • Line up the holes of the glide (478-9810/478-9811) with the holes in the cabinet box and secure with euro screws (478-9835).
- Page 7 DRAWER ADJUSTMENT AND REMOVAL ADJUSTMENT: A1 & A2- up/down adjustment A1) Turn the metal adjustment screw to adjust the drawer front up and down. A2) If the drawer is not adjusting in position, turn the right screw to unlock the hinge and retry step A1.
Need help?
Do you have a question about the 478-3822 and is the answer not in the manual?
Questions and answers