NetApp HCI Series Installation And Setup Instructions

NetApp HCI compute and storage nodes
Installation and Setup Instructions
Prepare for installation | Stage 1
UID
NODE B NODE B
NODE A NODE A
UID
A0
NetApp HCI chassis
In the box
H615C compute node
You provide
Access online
A1 A2 A3 A4 A5 B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 D0 D1
(only for H410S and H410C)
(order dependent)
Rack space
(order dependent)
H410C and H410S: 2U per chassis
H610C: 2U per chassis
H610S: 1U per chassis
H615C: 1U per chassis
SFP28/SFP+
direct-attach cables
or transceivers
• End User License Agreement
• Hardware Universe (HWU)
• NetApp HCI Documentation Center
Prepare Install
for installation hardware
1
UID
NODE D NODE D
HCI
NODE C NODE C
H610S storage node
UID
D2 D3 D4 D5
H610C compute node
Slide rail kit
USB stick
(optional)
CAT5e or higher cable
with RJ45 connector
H410C and H410S: Optional,
for out-of-band management
H610C: Optional, recommended
H615C and H610S: Required for out-of-band
management and cluster management
• NetApp HCI Resources page
• NetApp SolidFire Resources page
• SolidFire and Element 11.3 Documentation Center
Cable Configure
the node the node
2 3
(order dependent)
H410S storage node
(order dependent)
H410C compute node
(order dependent)
(order dependent)
Power cables
(Two per chassis)
Perform
post-deployment
4 5
tasks
Monitor with a
VGA connection
and keyboard with
a standard USB
connection
Any operating
system (OS) client
with a browser
215-14243_B0