Related Manuals for ZALMAN ZM-M190
Summary of Contents for ZALMAN ZM-M190
-
Page 1: Table Of Contents
Contents 1. Warning & Cautions 2. Components 3. Monitor Buttons 4. Connecting Monitor Cables 5. On Screen Display Menu 6. Display Specifications 7. Monitor Specifications 8. Troubleshooting (When using 2D & 3D Modes) -
Page 2: Warning & Cautions
- If smoke or strange smell is emitted from the monitor, unplug the power and contact the A/S Center. - Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing. -
Page 3: Components
Components Check the condition of the unit and its components before installation. If there is a problem with the unit and/or its components, please contact the retailer for a replacement. Adaptor Monitor Power Cable User’s Manual for 3D Monitor 3D Glasses 15-Pin D-Sub DVI Cable Audio Cable... -
Page 4: Monitor Buttons
Monitor Buttons (1) POWER : Turns the monitor ON/OFF (2) LED : Indicates the operational status of the monitor Green - ON / Red : No VGA data Orange (flickering) - Power Saving Mode (3) OSD Control - MENU : Opens / Shuts the OSD Menu - SOURCE : Seclects OSD Menu / Saves OSD Menu settings - ▲▼... -
Page 5: Connecting Monitor Cables
4 Connecting Monitor Cables Connect the cables to the bottom panel of the monitor. - Page 6 OSD Menu 5.1 Contrast & Brightness Color Contrast Picture Brightness Function Color Temp. Color Adjust OSD Menu Misc. Sound Used for adjusting the contrast and brightness. Contrast Brightness...
- Page 7 Color Contrast Color Picture Brightness Picture Green Color Temp. Function Blue Function Color Adjust OSD Menu OSD Menu Misc. Misc. Sound Sound Color Temperature Function Used for selecting the color temperature between 9300K, 6500K, and User. The user can manually adjusts the R,G,B settings in User Mode.
- Page 8 Phase Clock Function Used for adjusting the clock frequency to eliminate on-screen noise using the ◀▶ buttons. 5.3 Function Automatic Color Picture Adjust. Picture Automatic Color Adjust. Function OSD Menu Misc. Sound Automatic Picture Quality Adjustment & Automatic Color Adjustment Function Used for automatic adjustment of phase, color, horizontal / vertical positions, and sizes.
-
Page 9: On Screen Display Menu
5.4 OSD (On Screen Display) Menu Language Color Selection Picture H.Position Function OSD V.Position OSD Time OSD Menu Misc. Transparency Sound Language Selection Function Used for selecting the language for the OSD Menu (English, Spanish, German, French, Korean, and Japanese) OSD Horizontal and Vertical Position Adjustment Function Used for adjusting the Top/Bottom, Left/Right... - Page 10 5.5. Other Color Select Signal VGA DVI Picture Select Light PC Game Movie Initialization Function OSD Menu Misc. Sound Select Signal Function For selecting between ANALOG / DIGITAL signal Select Light Function For selecting the light according to the light environment or content.
-
Page 11: Display Specifications
Display Specifications The following is the timing table set by the display manufacturer. Mode Resolution Refresh rate H-freq. Pixel Freq. Remarks 640x350 70Hz 31.47KHz 25.175MHz VESA Standard 720x400 59.940Hz 31.469KHz 25.175MHz IBM VGA 3H 640x480 60Hz 31.5KHz 25.175MHz Industry Standard 640x480 72Hz 37.9KHz... -
Page 12: Monitor Specifications
Monitor Specifications Items Content 19 Inches Screen Size Pixel Dimensions 0.294mm(H) * 0.294mm(W) 300cd/㎡ Brightness Contrast Ratio 1000 : 1 Panel 2D View Angle 160°(L/R) / 160°(U/D) 3D View Angle 90°(L/R) / 10~12°(U/D) Response Rate Horizontal 52 ~ 81 KHz Frequency Vertical 49 ~ 76 Hz... - Page 13 Troubleshootting <Cautions> Opening the product may cause electrocution of the user or critical damage to the product. Product malfunction arising from external causes, including but not limited to improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing will only be repaired with a service charge.
- Page 14 8-2. In 3D Mode 1. Blurs and patterns are present when the screen is OFF. - This phenomenon is the result of the interference of outer light present on the air layer between the LCD screen and the 3D filter. The intensity of this pattern is very weak, which makes it unnoticeable when the LCD screen is ON so the monitor can be used without any inconvenience.
- Page 15 3. If the image is seen in 2D and not 3D - This monitor is a 2D/3D Convertible Monitor. Media that was produced in 2D can only be viewed in 2D, and only media created in 3D can be viewed in 3D. 4.
Need help?
Do you have a question about the ZM-M190 and is the answer not in the manual?
Questions and answers