Change Ip Address - Siemens SIMATIC IOT2000 Series Setting Up

3 Operating
3.2.2

Change IP Address

In the default settings of the SIMATIC IOT2000's Image, the IP address is set to
192.168.200.1. Thus, if another static IP address or a DHCP address is required,
this can be set with the iot2000setup tool
The following table displays the procedure for configuring the IP address settings.
Table 3-5
No.
1.
2.
3.
IOT2000 Setting Up
Version 2.1, 08/2017
Open a valid serial Putty connection and login as root (i.e. See topic 3.3)
Type in "iot2000setup" to open the setup tool, navigate to "Networking" and press
"Enter"
Go to "Configure Interfaces" and press "Enter"
Action
20