If you have any questions, please contact VELA Medical’s distributor in your country. VELA Medical reserves the right to make changes to this manual. VELA Medical Gøteborgvej 8-12 DK-9200 Aalborg SV Denmark www.vela-medical.com...
:: Incorrect use ”VELA Samba” and conforms to all applicable EU rules. The chair :: Use of non-original spare parts is manufactured by VELA Medical, and accessories Goeteborgvej 8-12, 9200 Aalborg SV, Denmark. :: Adjustments carried out by unauthorised service technicians 1.1.1.
1.4. MAINTENANCE 1.5. DISPOSAL We recommend your chair under- This product contains recyclable goes an annual service to find, for materials such as plastic, metal, etc. example, defective or worn parts. As a result, product disposal must The user should regularly retighten be carried out in compliance with all removable parts.
1.6. USER MANUAL Replacement of the gas spring may only be performed by the service support team from your dealer or a skilled technical person. 1.6.1. ATTACHING THE BACKREST* The lever for backrest adjustment (1) must be in open position. Press the locking pin spring (2) and push the backrest arm through the hole.
1.6.5. ADJUSTMENT OF SEAT HEIGHT, VELA SAMBA 410 Adjust the seat tilt by pushing the lever placed at your VELA right hand. SAMBA 1.6.6. ADJUSTMENT OF SEAT TILT* Adjust the seat tilt by pushing the middle lever placed at your right hand.
1.6.9. ADJUSTMENT OF SEAT HEIGHT* Adjust the seat height by pushing the lever placed at your VELA SAMBA left hand. 400 & 1.6.10. ADJUSTMENT OF SEAT TILT* Adjust the seat tilt by pushing the lever placed at your VELA SAMBA right hand.
1.6.13. ADJUSTMENT OF ARMREST, HEIGHT* Adjust by loosening the handwheel on the armrest bar and regulate the height of the armrest. Remember to tighten the handwheel again. Note: The armrest can be completely removed by loosening the armrest screw and pulling up the armrest bar. 1.6.14.
Need help?
Do you have a question about the Dental Chair and is the answer not in the manual?
Questions and answers