Crestron UC-P100-S Supplemental Manual page 56

Details of the Configuration Parameters
Parameter
static.network.lldp.enable
Description:
Enables or disables the LLDP (Linker Layer Discovery Protocol) feature on the phone.
Disabled
0-
Enabled, the phone will attempt to determine its VLAN ID through LLDP.
1-
Note: If the parameter is changed, the phone will reboot to make the change take effect.
Web User Interface:
Network > Advanced > LLDP > Active
Phone User Interface:
Menu > Setting > Advanced (default password: admin) > Network > LLDP > LLDP Status
static.network.lldp.packet_interval
Description:
Configures the interval (in seconds) for the phone to send the LLDP (Linker Layer Discovery
Protocol) request.
Note: This feature works only if the value of the parameter "static.network.lldp.enable" is set to 1
(Enabled). If the parameter is changed, the phone will reboot to make the change take effect.
Web User Interface:
Network > Advanced > LLDP > Packet Interval (1~3600s)
Phone User Interface:
Menu > Setting > Advanced (default password: admin) > Network > LLDP > Packet Interval
48 • UC-P100-S/UC-P110-S Phones for Skype for Business
Permitted Values
0 or 1
Integer from 1 to 3600
Supplemental Guide – DOC. 8412A
Default
1
60