Switch Test Screen - (Initialize Completed) - NAMCO FINAL LAP 3 UPRIGHT Operator's Manual

543 Color Bar Test
WARNING - HIGH VOLTAGE
Color should not need adjusting, but if the white fade test (the bottom
white bar) is tinted an off color, adjustment can be made with the appro-
priate color gun adjustment on the CRT neck board, i.e. RED - VR202,
GREEN - VR204, BLUE - VR206, or by a qualified Service Technician.
5-5 INITIALIZING CONTROLS
When replacing the game PCB, the ROM, the Steering Assembly, the Gas Pedal
Assembly, or the potentiometer, be sure to follow the procedures below.
(1) Open the coin door.
(2) Remove hands and feet from the steering wheei and the gas pedal.
(3) While in the game screen, hold the credit switch and turn the test switch on at
the same time.
(4) "INITIALIZE COMPLETED" will be shown on the monitor display (see
below), and the adjustment is fished.
(5) Turn the test switch "OFF" to return to the game screen.
S W I T C H T E S T
DIP SW
TEST SW
COIN1 SW
COIN2 SW
H A N D L E
T H R O T T L E 0 0
B R A K E
SHIFT
INITIALIZE COMPLETED
Illustration 5-6, SWITCH TEST SCREEN
1 1
1 2 3 4 5 6 7 6
ON
OFF 00
OFF 00
C E N T E R
00
0 0
L O W