Canon iR1210 Installation Procedure page 12

11 Connecting the Power Cord
1) Connect the power cord
F11-1
12 Fitting the Delivery Tray
1) Mount the delivery tray.
F12-1
13 Checking the Copy Images
1) Execute the following in user mode to stir toner:
6. ADJUST/CLEAN>4. MIX TONER.
2) Place an original on the copyboard glass or in
the ADF and select the cassette or the manual
feed tray as the source of paper; then, check the
copied images.
14 Setting the Printer Functions
1) Install printer drivers, and perform test printing
from the PC to check the images.
Be sure that the PC environment meets
the requirements of the machine before
installing the printer drivers.
For details, refer to Quick Start Guide.
15 Setting Fax Functions
(Only for the iR1270F/1570F
model)
15.1 Setting the Date/Time (user mode)
1) Press the Additional Functions key.
2) Press the Left/Right Arrow key, to select '5.
TIMER SETTINGS'.
3) Press the OK key.
4) Check to make sure that '1. DATE/TIME
SETTING' is indicated and press the OK key.
5) Enter the current date and time. Press the Left/
Right Arrow key to move the cursor to the
character to enter and enter a number using the
keypad.
6) Press the OK key so that the date/time will be
stored.
15-2 Setting the Dial Type
1) Press the Additional Functions key.
2) Press the Left/Right Arrow key to select '3.
FAX SETTINGS'.
3) Press the OK key.
4) Check to see that '1. USER SETTINGS' is
indicated and press the OK key.
5) Check to see that '1. TEL LINE SETTINGS' is
indicated and press the OK key.
6) Press the Left/Right key to select '2. TEL LINE
TYPE'.
7) Press the OK key.
8) Press the Left/Right key to select 'TOUCH
TONE' or 'ROTARY PULSE'.
9) Press the OK key so that the selected line type is
stored.
15-3 Executing Communications Testing
1) Press the Fax key in the control panel so that the
machine will be in fax mode.
2) Try sending and receiving an original and check
the operation and the images.
– 12 –