Taiyo Electric Goot RX-852AS Operation Manual
  1. Manuals
  2. Brands
  3. Taiyo Electric Manuals
  4. Soldering Gun
  5. Goot RX-852AS
  6. Operation manual

Taiyo Electric Goot RX-852AS Operation Manual

Temperature-controlled lead-free soldering station
Hide thumbs
Table of Contents

Advertisement

Quick Links

KEEP THIS MANUAL FOR FUTURE REFERENCE
Soldering Iron Stand is included.
Soldering iron stand usage is described in this manual.
WARNING
Before using the soldering station, read the Operation Manual.
Failure to follow the safety precautions and instructions in this
manual could result in serious injury and property damage.
Thank you for buying a goot soldering station. Your new soldering station has been
engineered and manufactured to the goot high standards for dependability, ease of operation,
and operator safety. If you follow the instructions and safety precautions in this manual and
use the soldering station properly and only for what it is intended, you will enjoy years of safe,
reliable service. Thank you again for buying a goot soldering station.
TAIYO ELECTRIC IND.CO.,LTD.
TEMPERATURE-CONTROLLED
LEAD-FREE SOLDERING STATION
RX-852AS
TAIYO ELECTRIC IND.CO.,LTD.
OPERATION MANUAL
Tip is not included.
Please buy it separately.
1
Ver.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Goot RX-852AS and is the answer not in the manual?

Questions and answers

Related Manuals for Taiyo Electric Goot RX-852AS

Summary of Contents for Taiyo Electric Goot RX-852AS

  • Page 1 TAIYO ELECTRIC IND.CO.,LTD. Ver.2 OPERATION MANUAL TEMPERATURE-CONTROLLED LEAD-FREE SOLDERING STATION RX-852AS KEEP THIS MANUAL FOR FUTURE REFERENCE Tip is not included. Soldering Iron Stand is included. Please buy it separately. Soldering iron stand usage is described in this manual. WARNING Before using the soldering station, read the Operation Manual.
  • Page 2 TAIYO ELECTRIC IND.CO.,LTD. Safety Mark Definitions Following the WARNINGS and CAUTIONS in this manual will allow for the safe and proper use of the soldering station, and should protect the operator from injury and operators' property against damage. WARNING Failure to obey a safety warning could result in serious injury or death to yourself or to others.

  • Page 3: Table Of Contents

    TAIYO ELECTRIC IND.CO.,LTD. 1 Table of Contents 1. Table of Contents / Specifications ..............3 2. Introduction ...................4 2.1 Features of the RX-852AS ................4 2.2 Unpacking ...................5 2.3 Name of Parts ...................6 3. Rules for Safe Operation ..................8 4. Operating Instructions ..................10 4.1 Changing the Set Temperature ..............

  • Page 4: Introduction

    TAIYO ELECTRIC IND.CO.,LTD. 2 Introduction Features of the RX-852AS The RX-852AS includes a compact, lightweight soldering iron with excellent heat recovery for lead-free soldering. The tip is a long-life compact type with integrated heater. 1. Excellent heat recovery (PAT.) 9. Sleep function release (PAT.)

  • Page 5: Unpacking

    TAIYO ELECTRIC IND.CO.,LTD. Unpacking Please make sure that all the items listed below are included, and that the soldering station (control unit and soldering unit) function properly. If any items are missing or damaged, please contact your goot distributor. Please store the packaging for future shipment or repair.

  • Page 6: Name Of Parts

    TAIYO ELECTRIC IND.CO.,LTD. 2-3 Name of Parts TEMP. ˚C RX-852 HEAT Operation Panel SLEEP LOCK Power Switch Output Terminal for Soldering Unit Power Cord Socket (With built-in replacement fuse) CAUTION [4-2] calibration of the tip temperature is requires after attaching the tip.
  • Page 7 TAIYO ELECTRIC IND.CO.,LTD. ■ Operation Panel ③ ① TEMP. ˚C RX-852 HEAT ④ SLEEP ② ⑤ LOCK ⑥ ⑦ ⑧ ⑨ 1. HEAT lamp Lights up when the heater is ON. 2. SLEEP lamp Flashes while setting the SLEEP function.

  • Page 8: Rules For Safe Operation

    TAIYO ELECTRIC IND.CO.,LTD. 3 Rules for Safe Operation WARNING The RX-852AS is an anti-static model. Be sure to properly ground the soldering station using a grounded receptacle to prevent electric shocks and anti-static. If it is not properly grounded, electric shocks will occur. As...
  • Page 9 TAIYO ELECTRIC IND.CO.,LTD. 7. USE STAND PROVIDED. Be sure to use the soldering iron stand (ST-21) included with the soldering station. If this stand is not used, the plastic parts (adapter ring and/or soldering unit housing) of the soldering iron unit could be damaged. Position the soldering iron stand on a flat work-surface bench.

  • Page 10: Operating Instructions

    TAIYO ELECTRIC IND.CO.,LTD. 4 Operating Instructions Changing the Set Temperature When the station is shipped the temperature is set at 250°C (482°F). The temperature can be set from 50°C (122°F) to 450°C (842°F). *For the steps given in the operation instructions, only °C is used.

  • Page 11: Calibration Of The Tip Temperature

    TAIYO ELECTRIC IND.CO.,LTD. Calibration of the Tip Temperature The temperature can be calibrated easily by inputting the tip number, which is engraved on the tip. When changing to a different type of tip, the calibration of the tip temperature is required before starting soldering work.

  • Page 12: Calibration Function

    TAIYO ELECTRIC IND.CO.,LTD. Calibration Function The RX-852AS can be calibrated using a tip thermometer. Generally speaking, when measuring the tip temperature of the RX-852AS with a standard tip thermometer, the measured temperature will usually be lower than that of the actual tip temperature displayed on the RX-852AS control unit display.

  • Page 13: Sleep Function

    TAIYO ELECTRIC IND.CO.,LTD. 4-4 Sleep Function The sleep start timer (CT) function automati- cally lowers the temperature of the tip after DIF (Sensitivity) Set temperature a preset period of inactivity. This function is exited by pressing any key on the control panel.
  • Page 14 TAIYO ELECTRIC IND.CO.,LTD. Setting the Sleep start Set to 5 minutes before shipping. time (CT) Unit: mins. Example : Changing the sleep start time from 5 to 10 minutes. Key Operation TEMP Display Press and hold the key for over...
  • Page 15 TAIYO ELECTRIC IND.CO.,LTD. Setting the Sleep Example :Changing the sleep sensitivity value from Sensitivity (DIF) Unit : °C 2.0 to 3.0 ˚C. Key Operation TEMP Display Press and hold the key for over Displays 3 seconds continuously. alternately Press the key four times.

  • Page 16: Setting The Shutdown Function

    TAIYO ELECTRIC IND.CO.,LTD. 4-5 Setting the Shutdown Function When the unit is not operated during the preset time, the unit is automatically shutdown. Even if the user forgets to turn OFF the unit, this Shutdown function works to keep the unit inactive and prevents accidents.

  • Page 17: Setting The Soldering-Time Alarm

    TAIYO ELECTRIC IND.CO.,LTD. 4-6 Setting the Soldering-time Alarm The RX-852AS sounds an alarm, when the soldering iron is left in contact with the component being soldered past the time set. This function prevents inexperienced operators from overheating the component. (1) R X-852AS star ts the soldering-time count down, when the tip temperature exceeds the set parameter.

  • Page 18: Setting The Temperature Range For The Alarm

    TAIYO ELECTRIC IND.CO.,LTD. Setting the Temperature Range for the Alarm This function indicates to the operator with the sound of the alarm, when Lower limit temp. Upper limit temp. the tip temperature goes past the set parameter. The illustration on the right...

  • Page 19: Control Function For Overshooting

    TAIYO ELECTRIC IND.CO.,LTD. 4-8 Control function for overshooting After soldering, the tip temperature may increase to higher than the set temperature depending on the tip type or the kind of work. (Overshoot) “Overshoot” will often occur when using the RX-85HSRT, but “Overshoot” can be con- trolled by setting the parameters.

  • Page 20: Setting The Alarm Sound

    TAIYO ELECTRIC IND.CO.,LTD. 4-9 Setting the Alarm Sound This setting switches the alarm ON and OFF. The initial setting is ON (the alarm sounds). Set to OFF for mute (no sound). Setting the alarm sound Key Operation TEMP Display Press and hold the Displays for over 3 seconds continuously.

  • Page 21: Setting The Temperature Display

    TAIYO ELECTRIC IND.CO.,LTD. 4-10 Setting the Temperature Display The temperature can be displayed in either Celsius or in Fahrenheit. The temperature display is set to Celsius (˚C) before shipping. Key Operation TEMP Display Press and hold the key for over...

  • Page 22: Key Lock Function

    TAIYO ELECTRIC IND.CO.,LTD. 4-11 Key Lock Function The Key Lock function locks the temperature and parameter settings so that the temperature and parameters cannot be changed by any unauthorized personnel. Authorized personnel may use a code number to set, or release the Key Lock function.
  • Page 23 TAIYO ELECTRIC IND.CO.,LTD. Changing the Code Number Example : When changing the code number from 123 to 234. Key Operation TEMP Display Press the key. Displays alternately Press and hold the for over 3 seconds continuously. Displays alternately Press the...

  • Page 24: How To Restore The Default Setting

    TAIYO ELECTRIC IND.CO.,LTD. Resetting the Code Number If you forget the code number, follow the procedure below to delete the code number and reset the key lock. This procedure releases the key lock function which means that unauthorized persons can change temperature and/or parameter settings. Please keep this manual with authorized personnel only and in a safe place for future reference.
  • Page 25 TAIYO ELECTRIC IND.CO.,LTD. 4-12 How to Restore Default Settings By doing the procedure shown below, all the parameters will be restored to the default settings set before the unit was shipped. The key-lock function is also unlocked using this procedure. This can allow a third party to alter the settings on the unit.

  • Page 26: Maintenance

    TAIYO ELECTRIC IND.CO.,LTD. 5 Maintenance CAUTION See instruction p. 34. The soldering unit is designed so the tip can be replaced without turning OFF the power. However, the tip is very hot. Do not touch the tip or serious burns may result.

  • Page 27: How To Change The Grip Rubber

    TAIYO ELECTRIC IND.CO.,LTD. How to Change the Grip Rubber 1. Remove the screw. Turn and pull the 2. Remove the old grip rubber and grip adapter to remove the grip rubber. replace with new one.          ...

  • Page 28: Housing Cleaning

    TAIYO ELECTRIC IND.CO.,LTD. 5-4 Housing Cleaning When cleaning, do not at any time allow gasoline, petroleum-based products, penetrating oils, etc. to come into contact with the plastic parts. They contain chemicals that can damage, weaken, or destroy plastics. 5-5 How to Use, Clean, and Maintain a Lead-Free Soldering Iron A lead-free soldering iron is more susceptible to oxidation, and it is more difficult to wet the tip with solder.

  • Page 29: Troubleshooting

    TAIYO ELECTRIC IND.CO.,LTD. What to do when the tip is blackened and not ‘wettable’ Using a clean sponge, repeat the process of ’tinning’ and ‘cleaning’ the tip several times. The tip surface of an iron that has been in use a short time, generally has a higher ‘wettability’...

  • Page 30: Replacement Tips

    TAIYO ELECTRIC IND.CO.,LTD. 7 Replacement tips RX-85HRT series Note : Since the heater is integrated in the tip, replacement of only the heater or the tip is not possible. RX-85HRT-B RX-85HRT-2BC RX-85HRT-3BC RX-85HRT-5BC 11.5 11.5 11.5 11.5 RX-85HRT-7BC RX-85HRT-3D RX-85HRT-5D RX-85HRT-7D 11.5...
  • Page 31 TAIYO ELECTRIC IND.CO.,LTD. RX-80HRT series Note : Since the heater is integrated in the tip, replacement of only the heater or the tip is not possible. RX-80HRT-B RX-80HRT-2B RX-80HRT-SB RX-80HRT-LB　 12.7 RX-80HRT-LBJ RX-80HRT-BM RX-80HRT-1BC RX-80HRT-2.3BC 30˚ RX-80HRT-3BC RX-80HRT-0.5C RX-80HRT-1C RX-80HRT-2C 11.5...

  • Page 32: Replacement Parts

    TAIYO ELECTRIC IND.CO.,LTD. 8 Replacement Parts For replacement parts, contact a goot distributor. Item Parts No. Note RX-85GAS (Tip is not included) RX-852AS Soldering unit Soldering Iron Stand ST-21 For RX-802AS/852AS/822AS Sponge ST-53SP For ST-53/21/27 Brass Wool ST-40BW Cleaner For ST-40/21/27 (2pcs./set) Grip Rubber Selection Four different colours available.
  • Page 33 TAIYO ELECTRIC IND.CO.,LTD. Term Display Shipping Unit Range (display panel letters) Panel Default Setting Minute 0.00 to 999 Sleep Timer (ct) ˚C 0. to 20.0 Sleep Sensitivity (diF) ˚F 0. to 36.0 Shutdown Start time Minute 0 to 999 (SUt) sec.

  • Page 34: Soldering Iron Stand St-21 Instructions

    TAIYO ELECTRIC IND.CO.,LTD. Soldering Iron Stand ST-21 Instructions WARNING ●High temperatures. Handle with care. ●To avoid injury, do not touch the metal part of the stand. ●To prevent fire, do not use the ST-21 near flam- mable substances. CAUTION ●Always place the stand on a stable worktable, or other stable location, to prevent injury or accident from dropping it.
  • Page 35 TAIYO ELECTRIC IND.CO.,LTD.
  • Page 36 TAIYO ELECTRIC IND.CO.,LTD. SOLDERING EQUIPMENT AND ACCESSORIES Customer service: Contact your nearest distributor TAIYO ELECTRIC IND.CO.,LTD. HomePage: www.goot.co.jp E-mail: info@goot.co.jp goot is registered trade mark of TAIYO ELECTRIC IND.CO.,LTD. Printed in Japan MAY 2015 A1240CX00...

Table of Contents