– To pull off lines -1- press release buttons on connecting pieces
of fuel filter -2-.
– To remove fuel filter -1-, press fuel filter from below
-movement arrow- upwards out of holder -2- and remove it
downwards.
Installing
Perform the following jobs:
Note
Note installation position of fuel filter!
♦
Note fuel line identification on fuel filter!
♦
Observe disposal regulations!
♦
– Insert new fuel filter into bracket.
– Push fuel lines -1- onto fuel filter connection. When doing this
ensure that fuel lines are seated securely on fuel filter.
– Fuel system: Bleed (diesel engine)
– Start engine and conduct a visual check of fuel system on fuel
filter.
Note
To ensure the engine starts immediately after changing the fuel
filter, bleed the fuel system using vehicle diagnostic, testing and
information system -VAS 5051B- or vehicle diagnostic and serv‐
ice information system -VAS 5052 A-
4.26
Fuel system: Bleed (diesel engine)
Using vehicle diagnostic, testing and information system -VAS
5051B- or vehicle diagnostic and service information system -
VAS 5052 A-
To ensure the engine starts immediately after changing the fuel
filter, bleed the fuel system using vehicle diagnostic, testing and
information system -VAS 5051B- or vehicle diagnostic and serv‐
ice information system -VAS 5052 A- .
⇒ page 83
.
⇒ page 83
.
Amarok 2011 ➤
Maintenance - Edition 01.2011
4. Descriptions of work
83
Need help?
Do you have a question about the Amarok 2011 and is the answer not in the manual?
Questions and answers