Using The "Panic" Function - Honeywell EchoView User Manual

6. Press [MODE] to make your selection. You are asked to confirm your selection.
7. Press [Y/+] to save it or [N/-] to cancel any change. The change is registered, and you see the
"success" screen:
After a few seconds, it returns to the menu screen with "Operating Mode" selected. Press [N/-] to
advance to the screen with "Exit" highlighted.
Press [MODE] to exit to the main

8.7. Using The "Panic" Function

The "Panic" function is designed so that it is very difficult to invoke by accident.
Start at the normal operating mode screen:
1. From the normal operating mode screen, press and hold all three buttons until you see this
screen:
2. Now press "Trigger Relays." This screen is now shown:
EchoView User's Guide
or
or
operating screen.
32