Table of Contents
Advertisement
16
ERROR CODES
The CYCLONE will indicate errors using the following codes. Please contact PEmicro if instructed
or if you are unsure of the specific meaning of an error code.
16.1
Debug Mode Communication Related Errors
$0001: No target device response.
$0002: Invalid target device response.
$0003: Programming operation canceled.
$0004: Error while waiting for programming operation to complete.
$0005: Error attempting to detect the communication speed.
$0006: Error: Attempt to unsecure the device was unsuccessful.
$0007: An error occurred while entering debug mode.
$0008: Error entering debug mode. The device is secured.
$0009: Error entering debug mode for verification.
$000A: Error writing data to target.
$000B: Error enabling or disabling device for programming.
$000C: Error performing timing test.
$000D: Error finalizing the programming process.
$000E: Error: Vendor hardware is not supported.
$000F: Error generating VPP high voltage.
16.2
SAP Image Handling Related Errors
$0011: No image selected
$0012: Error validating image CRC
$0013: SAP operation was not found. Error: SAP operation pointer not found
$0014: SAP image storage was not initialized
$0015: SAP image transfer error, odd length is not allowed
$0016: SAP image transfer error, invalid start address
$0017: SAP image transfer error while writing to storage
$0018: Error writing the serial number structure storage
$0019: Error writing the menu structure storage
$001A: Error erasing internal memory
$001B: Error: Image requires higher firmware version
$001C: Image version is not supported. Please update firmware.
$001D: Out of RAM memory. Try reset Cyclone.
$001E: SAP image storage failure
$001F: Old SAP image format, not supported.
$0020: Programming image is not accessible
$0031: System reset occurred
$0032: Error system is busy with other operations.
$0033: Error system is busy with too many inquiries.
16.3
SAP Algorithm header Operation Handling Related Errors
$0060: Unsupported SAP image.
User Manual For CYCLONE Programmers
67
Advertisement
Table of Contents
Need help?
Do you have a question about the CYCLONE and is the answer not in the manual?
Questions and answers