Engine Specifications; Common Specifications - Briggs & Stratton E Series Service Information

Rewind Starter and Blower Housing
The starter rope and the rope handle are the only serviceable parts of the rewind assembly. Place the rewind
assembly inside the blower housing with the handle in the required position (Figure 13a). Align the tabs in the
housing and the rewind and press together until all tabs snap into place. Line up the tabs of the retaining ring
(Figure 13b) with the slots on the rewind and snap it into position.

ENGINE SpECIFICATIONS

Common Specifications

Armature Air Gap
Bore and Stroke
Crankshaft End Play
Displacement
Exhaust Valve Clearance (Cold)
Intake Valve Clearance (Cold)
Fuel Tank Capacity
Oil Capacity
Spark Plug Gap
Spark Plug Torque
Figure 13a
.006 - .014 in
2.49 x 1.75 in
.002 - .028 in
.004 - .008 in
.004 - .008 in
Figure 13b
SAE
8.54 ci
.8 qt
15 oz
.020 in
180 lb-in
Metric
.15 - .36 mm
63.4 x 44.5 mm
.05 - 1.0 mm
140cc
.10 - .20 mm
.10 - .20 mm
.8 L
.44 L
.51 mm
20.3 Nm
Page 10 of 12