Alula RE667 Manual page 7

• Panel (Continued)
• Check for updates - this will tell the panel to check for any system updates
• Z-Wave
• Join/Leave Another Z-Wave Network - the panel can be placed into Z-Wave inclusion or
exclusion mode to allow it to join/ leave existing Z-Wave networks.
• Soft Reset - a soft reset will reset the Z-Wave controller software. All Z-Wave devices will
remain enrolled.
• Hard Reset - this action will cause your Connect+ Z-Wave module to be restored back to
the default state. Warning: Performing this action results in all Z-Wave devices being re-
moved from this Z-Wave controller. To add them back, you will first need to exclude them,
and then include them again.
**PLEASE SEE Z-WAVE USER GUIDE FOR ADDITIONAL INFORMATION**
• About - lists information about the panel's installed hardware and software