Screed Drying; Start Screed Drying; System Information; Contact Information - Hitachi YUTAKI Series Instruction And Operation Manual

UNIT CONTROLLER

8.6.4.3 Screed Drying

REF Access
SDC1 Circuit 1 Setting T
SDC2 Circuit 2 Setting T
-

Start Screed Drying

?
N O T E
• (*1): If Water calculation mode for circuit 1 heating (C1WC) or Water calculation mode for circuit 1 cooling (CC1WC) are not set as "Disabled".
• (*2): If Water calculation mode for circuit 2 heating (C2WC) or Water calculation mode for circuit 2 cooling (CC2WC) are not set as "Disabled".
8.6.5 About
In this menu, it is possible to consult some useful information. There are two main options:
•

System Information

•

Contact Information

8.6.5.1 System Information
System information view will give the version number of the Yutaki and the PC-ARFHE. It will be done in a view as the following one:
In this view, nothing can be edited.
It will appear:
•
Unit Type (S/SC/S80/M)
•
Unit Capacity
•
Controller Firmware: is the H-0XX software name of the LCD
•
Indoor PCB Firmware: ROM Number is a variable read from H-LINK, it is the 11-302
variable and transformed to H-00XX
•
Language Package: group of available languages
8.6.5.2 Contact Information
In the contact information, it can be entered:
• Name: every character could be entered from HAPE Ascii character map
• Phone Number: every number can be from 0 to 9 and "-"
These variables are only editable in the installer mode.
After changing a letter a broadcast message is set at informing to all the slave devices the new text to have all of them synchronized.
166 PMML0335A rev.1 - 04/2016
Default
Description
Value
Screed Drying
55
55
-
Range Steps Units
Limits installer 1 ºC
Limits installer 1 ºC
- -
Application
Notes
S SC S80 M
○ ○ ○ ○ (*1)
○ ○ ○ ○ (*2)
- ○ ○ ○ ○