Operation Guide; Led Indicators; Button Control; Access The Filehub - Ravpower RP-WD009 User Manual

Operation Guide

LED Indicators

Internet Indicator Work Status
Turns on white Connected to interent
Turns o Disconnected from internet
WiFi Indicator Work Status
Flashes Initiating
Stops ashing Connecting
Turns solid Connected to WiFi
5G Indicator Work Status
Turns on 5G WiFi connected
SD Card Indicator Work Status
Turns on white SD card inserted
Flashes white SD card reading or writing
Turns red Unable to back up or error
Battary Indicator
Turns on white
Turns on red
Fast ashes red
Blinks every 2 seconds
Blinks every 0.5 second
Work Status
≥ 30%
< 30%
< 10%
Charging
Shutting down

Button Control

Power Button Press to turn on / o the FileHub
Reset Button Press and hold for 5 seconds to reset to factory
settings
WiFi Mode Button Press and hold for 3 seconds to cycle through
2.4GHz / 5GHz / 5GHz & 2.4GHz WiFi modes
SD to USB Press to start copying and backing up data
Backup Button from the SD card to USB HDD
SD Card Slot Support up to 2TB SDXC
Micro USB Port Charge the FileHub
Data transfer with Micro USB devices
USB A Port Support USB ash and HDD drive data transfer
(FAT32, exFAT, NTFS)
Provide 1A output current to compatible devices

Access the Filehub

1) One Key Backup

1. Turn on the Filehub.
2. Plug into your ash drive/ hard drive and SD card. Wait until the
SD card indicator stops ashing and turns solid on.
3. Press and hold the SD to USB backup button for about 5 seconds
until the SD card indicator ashes again, indicating the Filehub is
reading the SD card.
4. Wait until the SD card indicator stops ashing, so the one-key
backup is completed.
5. Now you can check your backup folder named "SD backup" in
your ash drive / hard drive via the app RAV FileHub.
Note: The original le in your SD card will not be deleted.
05 / 06