Table of Contents
Advertisement
Description
Zc
Weight
Maximum weight (with all drives)
Processor specifications
Supported processor
Intel Xeon E-2124 3.3GHz, 4C, 8M Cache
Power specifications
The NX440 system supports two redundant power supply units. The following specifications are for each PSU.
Power Supply Unit (PSU)
Maximum output power
Maximum input current
Nominal input voltage operating range
Nominal input frequency
Heat dissipation (maximum)
NOTE:
This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 230 V.
Cooling fan specifications
The NX440 supports the following cooling fans.
NOTE:
When selecting or upgrading the system configuration verify the system power consumption with the Dell Energy Smart
Solution Advisor available at Dell.com/ESSA to ensure optimum power usage.
Table 1. NX440 fan support
Front storage
PSU type
4 x 3.5-inch
Redundant 350 W Required, if the PERC
System battery specifications
The NX440 contains one CR 2032 3.0-V lithium coin cell battery.
Expansion bus specifications
The NX440 NAS system supports up to two PCI express (PCIe) generation 3 cards.
16
Technical specifications
Dimension
573.6 mm (22.58 inches)
13.2 kg (29.10 lb)
Fan 1
card and/or expansion
riser is installed
Number of processors supported
One
350 W
4.8-2.4 A
100–240 VAC
50/60 Hz
1340 BTU/hr
Fan 2
Fan 3
Required
Required
Fan 4
Required
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NX440 and is the answer not in the manual?
Questions and answers