Hitachi HF-BX1000 Instruction Manual page 14

Industrial computer
Table of Contents

Advertisement

SAFETY INSTRUCTIONS (Continued)
 Performing emergency shutdown (that is, unplugging the power cord from
the outlet or shutting off the breaker without proper shutdown of the OS)
may cause the OS or applications not to work properly or may cause saved
data to be corrupted. Do not perform emergency shutdown unless you must
stop the system immediately due to some kind of error.
 If you turn off the power at the source of AC the power, the system may not
be able to recover automatically.
 Do not connect the No. 1 pin and No. 2 pin of GPIO contact. When these are
connected to the connector on the user's equipment, this equipment may not
operate normally.
 Make sure to confirm connector specification before creating a cable by a
user. If a user connect a cable which was mistaken about connector
specification to this equipment, this equipment may not operate normally.
 If you wash a dust filter, dry it completely before re-attaching it to the
equipment. If you use the equipment while its dust filter is not completely
dry, the equipment may fail. When you use a detergent to clean a dust filter,
make sure you use a neutral detergent. If you use other types of detergent, the
dust filter may lose its function.
 Make sure you disconnect all external cables connected to the equipment
before you install or remove an extension board. Otherwise, failure of the
equipment may result.
 Always attach a slot cover to each unused slot. Otherwise, failure of the
equipment may result.
 Make sure you disconnect all external cables connected to the equipment
before you install or remove main memory. Otherwise, failure of the
equipment may result.
 The orientation of a main memory module on a connector is fixed. When you
install a main memory module, make sure the orientation is correct.
Otherwise, failure of the equipment may result.
 Do not install main memory modules with different capacities on slot A and
slot B. If you do, the modules may not be recognized.
S-11
(See page 3-4.)
(See page 4-20.)
(See page 5-2.)
(See page 5-8.)
(See page 5-12.)
(See page 5-13.)
(See page 5-14.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hf-bx1200

Table of Contents