Problem Solving To Activate Wi-Fi - Bosch 7736504944 Installation Instructions Manual

Problem solving to activate Wi-Fi

8 Problem solving to activate Wi-Fi
Network issues or poor Wi-Fi signal strength
Wi-Fi issues may be caused by network problems such as low-signal strength.
Ensure the Wi-Fi signal strength at the appliance location is appropriate, by
accessing the SC Scan menu and inspecting the signal strength of the network you
are attempting to connect.
Exceed Wi-Fi activation time
The Wi-Fi module must be activated within 60 minutes after plug in the appliance to
the power supply.
▶ Unplug the appliance from the power supply.
▶ Repeat Wi-Fi activation process, see section 6 "Wi-Fi module activation".
Wi-Fi module disconnected from HMI
If it's not possible to configure Wi-Fi menus:
▶ Unplug the appliance from the power supply.
▶ Remove the front cover, see fig. 4, page 7.
▶ Confirm that Wi-Fi module is correctly installed in the HMI.
Wi-Fi module is located on the back side of HMI.
Fig. 10 Wi-Fi module installed in HMI
[1] Wi-Fi module
15
6 720 813 648 (2019/03)