The Reloop Elite does not require manufacturer specific drivers on Mac or Windows operating systems, and is plug & play with Serato DJ Pro. You may be asked to install a Control Panel, which allows you to adjust mixer settings.
Page 3
Overview Reloop Elite CONTROL FUNCTION POWER SWITCH Toggle power on/off KENSINGTON LOCK Used to secure device CH-2 INPUT Connect RCA phono or line-level device CH-2 GND POST Connect grounding wire from turntable for channel 1 SESSION IN/OUT Connect auxilliary input device or output for recording...
Page 5
Overview Reloop Elite FUNCTION SHIFT FUNCTION CONTROL CHANNEL EQ Adjust High / Mid / Low EQ per channel CHANNEL INPUT SELECTOR Adjust source selection per channel LOAD 1 Load selected track to deck 1 Focus Library select to PC 1 / USB A MASTER (SECTION) Adjusts Master level, Stereo/Mono toggle &...
• HOT CUE mode: Pads 1-8 trigger Serato DJ Pro Cue points, and if no Cue point is present on that slot/pad, will set a Cue point. Holding SHIFT while pressing a pad will clear the Cue point from that pad/slot.
Page 7
USER mode 1: Press the ‘SLICER’ mode button while holding SHIFT to enter USER mode 1. In this mode, you can assign pads 1-8 to different functions inside Serato DJ Pro, using the MIDI mapping feature, and save it as your own pad mode.
Page 8
Serato DJ Pro, to expose the DJ-FX panel, then, in the DJ-FX panel, select either multi or single FX modes. To read more about general use of DJ-FX in Serato DJ Pro, please refer to the DJ-FX section of the Serato DJ Pro user manual.
NOTE: Pitch Play mode is avaialble once the Pitch ‘n Time DJ Expansion Pack has been activated in the MY SERATO window. Make sure “Enable Pitch ‘n Time DJ” is checked in the Expansion Pack tab of the SETUP screen.
Page 10
Flip Flip is an Expansion Pack for Serato DJ Pro. Flip controls are only available once the Flip expansion pack has been purchased and activated. The expansion pack can be purchased in-app through the My Serato window in Serato DJ Pro or online at https://serato.com/dj/pro/expansions/flip...
MIDI The MIDI feature in Serato DJ Pro provides the ability to remap Serato DJ Pro software functions to your primary Serato controller, interface or mixer. You can also assign controls to a secondary MIDI controller to further enhance your performance.
Need help?
Do you have a question about the Reloop Elite and is the answer not in the manual?
Questions and answers