IVAPAC14BTU Thank you for purchasing the Ivation® Portable Air Conditoner. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
• Always inspect the cord and other parts of this unit for signs of damage before attempting to plug it in. If the power cord is damaged, it must be replaced by Ivation Customer Service or a qualified service technician.
If you press the TEST button, and the LED light does not turn off, or the air conditioner can still be powered on, current leakage has been detected. Do not use the air conditioner or attempt to reset the LCDI plug in these circumstances. Contact Ivation® Customer Care immediately for troubleshooting and repair recommendations.
WINDOW KIT ASSEMBLY AND INSTALLATION When this portable air conditioner runs in air conditioning mode, it needs to draw in air from indoors and exhaust the hot air outdoors. You need to install the Window Kit (if you will be using this unit in air conditioning mode or dehumidification mode.
5. Panels A and C should now be connected 6. Complete the assembly by tightening the wing nuts all the by Panel B as shown below. way down. INSTALLING THE WINDOW KIT The window venting kit must be installed in order for your portable air conditioner to function properly. It has been designed to fit into most vertical and horizontal window openings, as well as sliding glass doors up to seven feet long.
OPTIONAL SECURITY BRACKET INSTALLATION Your window kit also includes an optional security bracket that can be installed to prevent the window from being opened from the outside while the window kit is in place. To install the security bracket, fasten it to the window with a type B screw as shown, depending on the type of window. Single/Double Hung Windows Sliding Windows Security...
5. TIMER: Press the TIMER button while the unit is powered on to set a time until it automatically turns off. Pressing it while the unit is plugged in but powered off will set a time until it automatically turns on. Use the + and – buttons to set the duration of the timer in hours (from 1-24).
1. POWER: Press the POWER button once to manually turn the portable air conditioner on. Press it again to turn the unit off. 2. MODE: Press the MODE button to cycle through the different mode options. The corresponding indicator icons will light up on the LCD display.
Page 10
Dehumidifier Mode IMPORTANT: This unit will not perform in dehumidifier mode when the room temperature is below 50°F (10°C). 1. Install the exhaust hose and window kit properly. (See pages 5–6) NOTE: This step is required in order for the air conditioner to function. 2.
CARE AND MAINTENANCE Internal Water Tank When the room temperature is low and the indoor humidity is high, the air conditioner may not be able to evaporate all of the moisture in the air fast enough. When this happens, the water will accumulate in an internal water tank inside the unit.
fire. 4. If the filter is torn or unusable, order a new filter. Filters can be purchased on Amazon or by calling or emailing Ivation® Customer Care (1-866-849-3049 or info@myivation.com). Cleaning the Unit Housing 1.
If the code appears again, contact Failure Ivation® Customer Care. E3/E4 Coil Pipe Sensor Failure Contact Ivation® Customer Care. Make sure the room temperature is above 41°F (5°C) Low-Temperature Protection during operation. If the code appears again, contact Ivation® Customer Care.
Page 14
QUESTIONS OR PROBLEMS? CONTACT US! info@myivation.com | 1-866-849-3049 IVATION is a trademark of C&A IP Holdings, LLC, in the U.S, Canada, and the EU. All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement, or approval.
Need help?
Do you have a question about the IVAPAC14BTU and is the answer not in the manual?
Questions and answers