Defining A Configuration As Standard Configuration - AGFA d-lab.3 Technical Documentation Manual

Settings

Defining a Configuration as Standard Configuration

For each film carrier – 135FF, 120, File print etc. –
a single or another order configuration can be
declared to be the standard configuration. This
configuration is shown in the first position in the
configuration list and is used automatically:
after the start
–
after changing the film carrier
–
after changing the print mode
–
Activate Standard in the desired configuration
–
(bottom left on the screen)
If the standard (default) configuration is to be
changed, the field in the respective order
configuration must be activated. A message
coming up on the screen must be confirmed.
Changes or deactivation within the active
standard configuration is not possible.
The standard configuration is always shown in
the first line in all configuration lists.
4.78
2003-06-01 /PN 9008
Operation
022_aps
AGFA d-lab.3