Factory Reset; Tv List; Tv Guide; Radio - Tele System TS6282 User Manual

TELE System

ON: by activating "OTA in Operative mode", the receiver will control the time indicated in the Time
field on a daily basis and with the frequency indicated in the "OTA Frequency" field. In this case, a
control in "Standby Mode" (if active) will start only at the time displayed in the menu.

4.1.6 Factory reset

If necessary, reset the receiver to its factory settings through a software reset. Go to the Tools – Factory
Reset menu and press the OK button. You will be asked to confirm.
CAUTION!
Factory Reset means you will lose all the channels that were memorised and all personalised settings, but not the last
version of the software installed.
5 TV

5.1.1 TV list

Access to the channels list allows you to modify and organise the list itself and each channel. It is possible to
create favourites lists, to move and/or jump channels to create a personalised list or to
block/rename/eliminate one or more channels. A PIN number is required to access this function.

5.1.2 TV guide

It is possible to view the TV programming of each channel, reserve the viewing of a program and/or record it
from the Electronic Program Guide (EPG).
NOTE

The information present in the EPG depends on the information sent by television stations.

6 Radio

6.1.1 Radio list

Access to the Radio channels list allows you to modify and organise the list itself and each channel. It is
possible to create favourites lists, to move the Radio channels to create a personalised list or to
block/rename/eliminate one or more Radio channels. A PIN number is required to access this function.

6.1.2 Radio guide

It is possible to view the TV programming of each Radio channel, reserve the viewing of a program and/or
record it from the Electronic Program Guide (EPG).
NOTE

The information present in the EPG depends on the information sent by television stations.

7 Multimedia

The USB port on the front of this receiver allows for multimedia files to be read and for unencrypted digital
terrestrial programs to be recorded.
CAUTION!

The receiver is compatible with USB memory devices formatted with FAT16/FAT32 file systems.

When connecting a hard disk, free memory space of at least 300 GB is required.

To work properly, some hard disks that are auto-powered via USB could require an external power supply.

Full compatibility with all USB memory devices on the market is not guaranteed.

Formatting the memory device from the "Recording Device" menu is strongly advised.

The use of a device with at least 4 GB of free (unused) memory is advised.
USB memory connection
After the USB is connected, and after each decoder start-up, a control of the device is undertaken that could
last a few seconds depending on the amount of memory in the device.
After the first recording, a folder called MYRECORD is created, that acts as the receiver's working folder for
recordings.
CAUTION!
Never disconnect the USB memory device during multimedia reproduction, while recording, formatting or in the presence
of an recording even timer: the devices involved may be irreversibly damaged!
8