Southbend SPR-1 Operator's Manual

Stock pot range

Hide thumbs

Table Of Contents

Quick Links

Download this manual

IMPORTANT

FOR FUTURE REFERENCE

Please complete this information

and retain this manual for the life

of the equipment.

MODEL #

SERIAL #

DATE PURCHASED

OPERATOR'S MANUAL

INSTALLATION

OPERATION AND MAINTENANCE

INSTRUCTIONS

STOCK POT RANGE

MODEL:

SPR-1, SPR-2, and SPR-3

Improper installation,

adjustment,

alteration, service, or maintenance

can

cause property damage,

injury or death. Read the installation,

operation and

maintenance

instructions

thoroughly

before installing and operating this

equipment.

1100

Old Honeycutt Road . Fuquay-Varina, NC 27526

(919)552-9161

.(800)348-2558

Fax

(800) 625-6143

(919) 552-9798

Middleby Corp. Service Hot Line (800)238 8444 (after hours)

$18.00

COUNTER STEAMER

(MANUAL SECTION SR)

Table of Contents

Need help?

Do you have a question about the SPR-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Southbend SPR-1

Page 1 Middleby Corp. Service Hot Line (800)238 8444 (after hours) $18.00 INSTALLATION MODEL: SPR-1, SPR-2, and SPR-3 adjustment, alteration, service, or maintenance injury or death. Read the installation, instructions thoroughly before installing and operating this Old Honeycutt Road . Fuquay-Varina, NC 27526...
Page 2: Safety Precautions
Before installing and operating this equipment, be sure everyone involved in its operation is fully trained and aware of precau- tions. Accidents and problems can be caused by failure to follow fundamental rules and precautions. The following symbols, found throughout this manual, alert you to potentially dangerous conditions to the operator, service personnel, or to the equipment.
Page 3 Congratulations! You have purchased one of the finest pieces of heavy-duty You will find that your new equipment, like ail Southbend est standards in the industry. Each piece of Southbend laboratory tests and field installations. With proper care and field maintenance, free operation.
Page 4 TOP VIEW Dimensions: NOTE: Above dimensions are for single Stock Pot Ranges. SPR-2 Double and SPR-3 Triple Stock Pot Ranges are shipped assembled at factory and above dimensions are different. UTILITY INFORMATION: One 3/4” connection required for each individual Range or each range in a bat- tery of two or three.
Page 5 GAS CONNECTION: The Serial Plate is located at the rear of the unit on the back panel. It indicates burn. All Southbend equipment is adjusted at the factory but may need a finish adjustment once installed. on serial plate. These models are design-certified for operation on natural or propane gases.
Page 6: Exhaust Fans And Canopies
If this equipment is being installed at over 2,000 feet altitude and was not specified on order, contact the appropriate authorized Southbend Service Representative or the Southbend Service Department. Failure to install with proper ori- fice sizing will result in improper performance and may void the warranty.
Page 7 Proper ventilation is the owner’s responsibility. covered by warranty. improper ventilation can result in personal injury or death. Ventilation which fails to properly remove flue products can cause headaches, LEVELING: Unit must be level to assure maximum performance. TO INSTALL STOCK POT RANGE: 1.
Page 8: Leg Assembly
FIGURE LEG ASSEMBLY NOTE: Items A, B, and C are installed at the factory. items D and E are to be installed in field. Flanged feet (item E) must go on to the rear of the unit. * 1179510 is a leg package consisting of 2 standard legs and 2 flanged legs. PAGE 6...
Page 9: Performance Check
PERFORMANCE CHECK: The following items should be checked within the first 30 days of operation 1. Verify equipment is level. 2. Check ventilation. 3. Check timers, switches and motor for proper installation and operation. 4. Check for any damage to unit from shipping or installation. 5.
Page 10 THEORY TO LIGHT STANDING PILOT: 1. Locate pilot adjustment screw. through the slotted hole in the control panel. 2. Verify the gas supply line is connected 3. Light pilot and verii that the pilot flame is approximately 4. If pilot is too low turn pilot adjustment pilot is too high turn pilot adjustment aas buildup which could result in exolosion: eliminate...
Page 11 A WARNING of commercial gas cooking equipment. Southbend service agency for reliable service, dependable advice or Authorized Service Agency or another qualified service technician clean and Distributor list for the Authorized Service Representative at Southbend, l-800-348-2558 for their name and number.
Page 12: Maintenance
Southbend equipment is sturdily constructed of the best materials and is designed to provide durable service treated with ordinary care. To expect the best performance, your equipment must be kept in good condition cleaned daily. Naturally, the periods for this care and cleaning depend on the amount and degree of use.
Page 13 Replacement parts may be ordered either through a Southbend Authorized Parts Distributor or a Southbend Authorized Service Agency. When ordering parts, please supply the Model Number, Serial Number, Part Number, Description, Electrical Characteristics as applicable.
Page 14 FIGURE 2 MISCELLANEOUS PARTS TO AlTACH (2) SPR-1 UNITS Refer to figure 2 for parts list below. SPR-2 requires 3 per pair of units. SPR-3 requires 6 total. PAGE 12...
Page 15: Main Body Components
Refer to figure 3 for parts list below. 1179467 1179472 1179519 1179477 MAIN BODY COMPONENTS Filler Strip for Side Liner PAGE 13 Frame Grate Shield, Screw Side Liner, Right...
Page 16 FIGURE 3 PAGE 14...
Page 17 FIGURE GAS LINE ASSEMBLY 1160532 Knob 1179529 Pilot Bracket * Includes all items in figure 4, except items A, B, N, 0 PAGE 15...
Page 18: Burner Components
FIGURE 5 BURNER COMPONENTS OPTINAL ACCESORIES: ITEM PART NUMBER 1179259 1179387 1179388 * Not Shown PAGE 16 DESCRIPTION Wok Ring, Tall Wok Ring, Short Wok Pan, use with rings...
Page 19: Limited Warranty
This warranty does not cover services performed at overtime or premium labor rates nor does Southbend for extended delays in replacing or repairing any items in the equipment beyond the control of Southbend, not be liable for consequential...
Page 20 The @igoing wanmty is exclusive and in lieu oftdl other exfmssd or implied 7hee are no irnpkc/ wanmties ofmetdmntabiky Southbend, hereinafter referred to as the seller, warrants equipment manufactured by it to be free from defects in material and workmanship for which it is responsible. The seller’s obliga- tion under this warranty shall be limited to replacing or repairing such part.
Page 21 We all recognize however, that replacement parts and occasional professional service may be necessary to extend the useful life of this unit. When service is needed, contact a Southbend Authorized Service Agency, or your dealer. To avoid confusion, always refer to the model number, serial number, and type of your unit.

This manual is also suitable for:

Spr-2 Spr-3