Headers - Digi MiniCore RCM5700 Series User Manual

B.2.1 Headers
The Interface Board has a header socket at J2 for physical connection to other boards. J2 is a
2 × 25 SMT header socket with a 0.1" pin spacing. Figure B-3 shows the layout of another board
to be plugged into the Interface Board — this footprint is identical for the Prototyping Board and
the two accessory boards. The values are relative to the mounting hole.
Figure B-3. Interface Board Footprint.
(All measurements are in inches followed by millimeters enclosed in parentheses.)
rabbit.com
MiniCore RCM5700/RCM6700 User's Manual 61
Downloaded from Elcodis.com electronic components distributor