Advertisement
Quick Links
Advertisement
Summary of Contents for Wilko CPC1711WK
- Page 1 PIZZA OVEN, GRILL & SMOKER Assembly instruction (0449312)
-
Page 2: Expanded View
Expanded View... -
Page 3: Parts Supplied
Parts Supplied Please check parts against the list below before assembling your Barbecue Grill Take a few moments to familiarise yourself with the contents. Check that all holes are clear of paint before assembly, if you find a blockage, please use a screw driver to clear the blocked hole. Chimney top Firebowl air vent Chimney... -
Page 4: Fittings Supplied
Fittings Supplied Screw M4x12 Screw M5x12 Step screw M5x12 Screw M6x15 Wing Nut Nut M10 Screwdriver Wrench M10 Screwdriver (included) and wrench (included) are required to assemble the Barbecue. • Dispose of all polythene packing carefully and keep out of the reach of children. •... - Page 5 Assembly Please read all instructions thoroughly before proceeding. Find a large, clean area in which to assemble your barbecue. Please refer to parts list and assembly diagram as necessary. Assembly of the barbecue involves many large components, it is advisable to have two people assemble the unit. STEP 1: A: Attach firebowl air vent (10) to firebowl (6) ((C) Step screw 1Pc / (E) Nut 1Pc).
- Page 6 STEP 2: Attach left leg (12), right leg (14) and firebowl base (11) to firebowl ((D) Screw 8Pcs). Note: Do not fully tighten the screws until all screws are in place. (12) (14) (12) (14) (11) STEP 3: Attach bottom rack (13) to legs ((D) Screw 4Pcs). Note: Do not fully tighten the screws until all screws are in place.
- Page 7 STEP 4: Attach axle (15) and wheels (16) to right legs ((F) Nut 2Pcs). Note: Use wrenches (H) to tighten the wheel nuts (F). (16) (15) (16) STEP 5: A: Attach chimney top (1) to chimney (2) ((A) Screw 3Pcs). B: Attach control knob (3) to the chimney damper ((B) Screw 1Pc).
- Page 8 STEP 6: A: Attach chimney to firebowl ((D) Screw 3Pcs). B: Attach firebowl handle (8) to firebowl ((D) Screw 4Pcs). Note: Do not fully tighten the screws until all screws are in place. (D) (D)
- Page 9 STEP 7: Attach door (7) to firebowl ((A) Screw 12Pcs). Note: Do not fully tighten the screws until all screws are in place. (A) (A) (A) (A) (A)
- Page 10 STEP 8: Open the lower door and insert the water / charcoal pan (9) into firebowl. Note: Charcoal pan is located at the lower tier and water pan is located at the upper tier.
- Page 11 STEP 9: Open the upper door and insert both cooking grid (5) into firebowl and place the pizza stone (4) onto both cooking grids (5).
-
Page 12: General Safety Warnings
Instructions for use Important: Read all the assembly instructions and safety warnings before use and keep these instructions in a safe place for future reference. 1. Make sure the assembly instructions have been followed correctly. 2. Set the barbecue up in a suitable position, on a level surface away from areas likely to catch fire. 3. - Page 13 24. Do not use the barbecue in a confined and/or habitable space e.g. houses, tent, caravans, motor homes, boats. Danger of carbon monoxide poisoning fatality.
- Page 14 6. To clean your barbecue soak the cooking grill and tools in hot soapy water as soon as possible after use. Dry thoroughly and store in a dry place. Do not leave your barbecue outside unprotected. Produced in China for Wilko, Roebuck Way, Manton Wood, Worksop, Nottinghamshire, S80 3EG...
Need help?
Do you have a question about the CPC1711WK and is the answer not in the manual?
Questions and answers