Wiring The Aa35; Security Cover Option - Atlas AA35 Owner's Manual

AA35 MIXER AMPLIFIER

WIRING THE AA35

Speaker Outputs - Use 2 conductor unshielded wire of the appropriate gauge. If you are unsure about
this, contact Atlas Sound Tech Support at 1-800-876-3333. Make sure you know how many speakers you
need and what tap value you intend to use.
Mic/Line Input - Use 2 conductor w/ shield for low level signals of 20-22 gauge is best. Maintain the
proper polarity, + to +, – to – , and shield to ground.
Unbalanced Inputs and Outputs - Pre-made RCA cables can be purchased from vendors to simplify
interconnection to external devices.
Zone 2 Out - Use 2 conductor, 20-22 gauge, shielded is best. Terminate the shield at the input to the
device if possible.

SECURITY COVER OPTION

In order to prevent unauthorized operation of the AA35, optional security covers are available which take
the place of the front panel knobs. After the AA35 has been installed and is operating as desired, grasp
the front panel knobs and pull straight out from the front panel. Replace the knobs with security covers,
Atlas part number AAVCC-5, available in quantities of 5.
Input 1
Bass
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •
©2006 ATLAS SOUND LP
Input 2 Input 3
Treble
or
Front Panel
Knob
Security Cover
Specifications are subject to change without notice
AtlasSound.com
Printed in U.S.A.
OWNER'S MANUAL
Signal Peak
On
Off
TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
000106 ATS002171 RevA 01/06
Power
Power
PP
16