Printer Drive And Keyboard Ground Plane Screw Locations - HP PageWriter XL M1705B Service Manual

Figure 7-8. Printer Drive and Keyboard
Ground Plane Screw Locations.
A. Gear housing screws
B. Motor ground spring
C. Motor ground spring attaching screw
D. Keyboard ground plane screws (two of four)
5. Remove the screw (callout C in Figure 7-S) that attaches the
motor ground spring to the upper chassis.
6. Disconnect the motor and sensor connectors.
7. Remove the two screws (callout A in Figure 7-S) that attach the
plastic gear housing to the carcliograph.
S. Carefully pry up the plastic gear housing to free it from the
alignment pins on the cardiograph. If the gears fall off their
shafts, refer to the first step in the printer drive replacement
proceclure later in this chapter.
7-10 Removal and Replacement