Phoenix Contact FL SWITCH GHS 12G/8 User Manual page 79

Format
Mode
Format
Mode
Note:
Before adding a port to a port-channel, set the physical mode of the port. For more information, see
on page
Format
Mode
Format
Mode
Format
Mode
Default
Format
8039_en_01
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx
port-channel <name>
Global Config
no port-channel
This command deletes a port-channel (LAG).
no port-channel {<logical slot/port> | all}
Global Config
addport
This command adds one port to the port-channel (LAG). The first interface is a logical
slot/port number of a configured port-channel.
3.
addport <logical slot/port>
Interface Config
deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical
slot/port number of a configured port-channel.
deleteport <logical slot/port>
Interface Config
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a
logical slot/port number of a configured port-channel. To clear the port channels, see
.
port-channel" on page 22
deleteport {<logical slot/port> | all}
Global Config
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The
value range of <key> is 0 to 65535.
0x8000
lacp admin key <key>
Port-Channel/LAG (802.3ad) Commands
"speed"
"clear
2-51
PHOENIX CONTACT