RIDGE RYDER 538796 Instructions Manual

RIDGE RYDER 538796 Instructions Manual

Caravan solar panel kit 110w

Advertisement

PLU 538796

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 538796 and is the answer not in the manual?

Questions and answers

Summary of Contents for RIDGE RYDER 538796

  • Page 1 PLU 538796...
  • Page 2 • Never charge a frozen battery, non-rechargeable, lithium ,calcium or dry cell battery. • The Ridge Ryder Solar Caravan Panels may have sharp edges – please handle with care. • Do NOT bend or scratch Solar Caravan Panels.
  • Page 3 Strong and dependable aluminium frame   happens. User has to clear short circuit , then press the button or restart Please Note: The Ridge Ryder Solar Caravan Panel Kit is not designed   the regulator.  to recharge a flattened battery, the use of a 240V Bat ter y Charger is o High Voltage Transients Protection  recommended in this instance.
  • Page 4: Technical Specifications

    4. TECHNICAL SPECIFICATIONS BATTERY VOLTAGE CONTROL PARAMETERS • Below parameters are in 12V system at 25 ℃. CARAVAN PANEL Battery Type SEALED/AGM FLOODED(LEAD ACID) Over Voltage Disconnect Voltage 16.0V 16.0V 16.0V Part Number: TPS-105S-110W Charging Limit Voltage 15.0V 15.0V 15.0V Charger Type: Solar Over Voltage Reconnect Voltage...
  • Page 5: Mount Kit

    Part List REGULATOR ⑦ ⑨ ⑧ Serial No. Description of parts Quantity Corner mount (inclusive of base & cover) 4 pcs ⑥ Middle mount (inclusive of base & cover) 2 pcs ① 20 pcs Locking screws 20 pcs Screws for 35mm height frame only Height adjusting screws for 18- 40mm height frame 20 pcs ②...
  • Page 6 Step 2 Place solar panel on top of the bases. Corner Mount Middle Mount Step 1 Secure base of the corner mount (and the middle mount, if applicable). The bases can be secured either by screws (not included) to the desired surface Step 3 through the holes at its bottom or you can secure by using strong adhesive Secure solar panel by fitting the mount covers and securing with locking...
  • Page 7 Step 4 Step 2. Battery Status Indicator This universal solar panel mount can handle any solar panel frame with thicknesses between 18mm and 40mm Max. Soft material, such as rubber, can be placed in-between the screw and the frame to prevent scratch and LED2 LED1 LED3 LED4...
  • Page 8: Specifications

    9. TROUBLESHOOTING Step 3. Setting Operation 1. Load ON/OFF Setting Problem /Indication Possible Causes Suggested Solution When the regulator is powered on, press the button to control the load Confirm that Solar panel No LED Indicator illuminated Solar panel disconnection output.NOTE: The USB will output when the load is on.
  • Page 9: 10. Frequently Asked Questions

    10. FREQUENTLY ASKED QUESTIONS Q. Are the Solar Caravan Panels waterproof or water resistant? A. Yes. Provided the Caravan Panels have been mounted correctly they will operate in most weather conditions. Please Note: The Solar Regulator is NOT waterproof or water resistant. For a regulator that is water resistant please see your local Supercheap Auto store.

Table of Contents

Save PDF