Related Manuals for Ion Technologies B-1000
Summary of Contents for Ion Technologies B-1000
- Page 1 OPERATING MANUAL PERMANENT FILTER IONIC AIR PURIFIER Model No. B-1000 READ AND SAVE THESE IMPORTANT...
- Page 2 INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance with the adapter directly into an AC electrical outlet.
- Page 3 performed by qualified personnel only. 14. WARNING: To reduce the risk of fire or electric shock, DO NOT use this air purifier with any solid-state speed control device. 15. DO NOT place anything on top of unit. 16. The collection rod has many edges and areas that can trap water. The collection rod should be completely dry before installing it into the unit.
-
Page 4: Getting Started
Figure 1 FEATURES ● ELECTROSTATIC COLLECTING ● OZONE FILTER and ACTIVATED CARBON FILTER ● POWERFUL UV LAMP ● NEGATIVE IONIZER OZONE SAFETY INSTRUCTIONS The electrostatic/ionic air purifier will produce small amounts of ozone as a by-product. This unit complies with the requirements of UL 867 for acceptable levels of ozone (less than 0.05 parts per million by volume of air circulating through the product). - Page 5 Figure 2 Figure 3 AMBIENT BLUE LIGHTING INSTRUCTIONS (See Figure 3) This purifier also provides a soothing blue ambient decorative light. Turn the decoration lamp light switch on to turn on the blue light and turn the switch off to shut the blue ambient lamp off.
- Page 6 Figure 4 REMOVING/ CLEANING/INSTALLING THE COLLECTOR ROD (See Figure 4) ● To remove the collector rod: 1. Unplug the unit; 2. Press the release button and flip the top cover backward; (See Figure 4 and follow arrow ①) 3. Grip the collector rod handle and pull it up firmly. (See Figure 4 and follow arrow ②) ●...
- Page 7 2. Use a sponge with a mild soap and water solution to wipe the collector rod from top to bottom; 3. Wipe down the collector rod with a damp cloth and ensure that no soap residue remains on the collector rod and it is completely dry. (Do not place under running water to rinse.) 4.
- Page 8 Figure 5 REMOVING/CLEANING/INSTALLING THE CARBON FILTER (See Figure 5) ● To remove the filter: 1. Unplug the unit; 2. Press the release button and flip the top cover backward; (See Figure 5 and follow arrow ①) 3. Take out the filter from top cover by pressing and gripping the spring on the filter cover.
-
Page 9: Cleaning And Maintenance Of The Unit
3. Ensure the filter is flush with the surrounding surface; 4. Flip the top cover forward and securely latch in place. CLEANING THE UV LAMP (See Figure 5) ● To find the UV lamp: 1. Unplug the unit; 2. Press the release button and flip the top cover backward; (See Figure 5 and follow arrow ①) 3. -
Page 10: Troubleshooting Tips
any accumulated debris off the electronic wires. IT IS NORMAL TO HEAR THE SOUND OF THE CLEANING SPHERES SCRAPING THE WIRES. NOTE: Do not stick any foreign objects or your fingers inside the unit. 5. Use a clean, dry, soft cloth to wipe the external surface of unit. CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc., as they will damage the product. -
Page 11: Electrical Specifications
● The air purifier was making a “cracking” sound and now it doesn’t seem to be cleaning the air any more. Is it broken? - No. The air purifier needs to be cleaned. When too much dirt accumulates on both the collector and electrostatic wire, the power to the collector rod turns-off, but the fan will continue to run.
Need help?
Do you have a question about the B-1000 and is the answer not in the manual?
Questions and answers
My air cleaner **** is making a lot of noise Is it dying? Can it be fixed?
The Ion Technologies B-1000 air cleaner normally makes noise when the cleaning spheres inside the unit scrape accumulated debris off the electronic wires. This sound is expected. If the unit shuts off unexpectedly, safety features may have been activated. To fix this, ensure the purifier is plugged into a working outlet, check that the collector rod is properly seated, and confirm the top cover is latched securely. If problems persist, contact tech support. Do not attempt to take apart the unit yourself, as this may void the warranty.
This answer is automatically generated