Introduction Outdoors RV Manufacturing appreciates and welcomes you as a customer. We want your RV purchase and camping experience to be most enjoyable for many years to come! We have provided this Owner’s Manual so that you and your family will be able to make the most out of your camping experience.
Introduction To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800- 424-9153); go to http://nhtsa.safercar.gov; or write to: Administrator, NHTSA, 1200 New Jersey Avenue SE, Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov.
Outdoors RV Mfg. dealer perform the inspection and work for you. If correct maintenance was performed and documented properly and the defect is valid, Outdoors RV Mfg. will authorize the repair at the factory in La Grande, OR at no expense to the customer (Travel costs not included).
No person has the authority to enlarge, amend, or modify this Limited Warranty. Outdoors RV will not be responsible or liable for loss of use of the recreational vehicle, onsite service calls or service charges, loss of time, inconvenience, expenses for gasoline, towing charges or transportation costs, loss of use, rental of substitute equipment, telephone, travel, lodging, damage or loss of personal property, loss of revenues or other commercial loss, or any other kind of nature resulting from any defect in the recreational vehicle.
Outdoors RV dealer with proof of purchase and freight pre-paid, (if having transported), within a reasonable time after the discovery of the defect within the warranty period. Outdoors RV does not cover any transportation cost incurred to transport the recreational vehicle to the dealer or to the manufacturing plant.
Outdoors RV Manufacturing Limited Warranty be modified or amended. PRE−DELIVERY INSPECTION Your Outdoors RV dealer is required to review the limited warranty and inspect the unit along with you. The dealer has been provided with a pre-delivery checklist. Review this checklist with the dealer. You should not sign this checklist until the review is complete and any questions about anything you do not understand have been answered.
INSPECTING REPAIRS Outdoors RV and your dealer want you to be satisfied with any repair. Have the dealer service personnel review with you the repair that was performed. Thoroughly inspect the repair(s). Once satisfied, sign the warranty repair work order.
On the Road GUIDELINES FOR EQUIPMENT SELECTION AND PREPARATION Your towing equipment, its adjustments, and how you load the RV will have a great effect on towing stability and handling. The following rules will help you select and adjust your equipment in a manner that will help produce acceptable towing characteristics.
Page 13
No weight distribution or sway control devices are needed with a fifth wheel hitch. Fifth wheel hitch extenders also called gooseneck tongue adapters are not to be used with Outdoors RV fifth wheel travel trailers. Use of a hitch extending device may cause structural damage to the chassis pin-box assembly.
On the Road OPERATOR LICENSING REQUIREMENTS States, Canadian provinces and municipalities may require special permits and licenses based on the size and weight of your RV especially if it is over eight feet wide. Some states or Canadian provinces may require additional equipment for the tow vehicle such as side and rear-view mirrors.
Page 15
On the Road After every trip all hitching components on both the tow vehicle as well as the RV should be inspected for wear or damage. If any excessive wear or cracking is observed, have the trailer inspected by a qualified professional and if necessary, replace the affected parts before any unnecessary travel.
Page 16
On the Road Do not connect the breakaway switch lanyard to the hitch ball or to any removable part of the hitch. Remember that the breakaway switches' emergency braking feature requires a fully charged battery on the RV. Never attach safety chains to the hitch ball or to any removable part of the hitch.
On the Road Do not connect the breakaway switch lanyard to the king pin, pin box, or to any removable part of the hitch. Remember that the breakaway switches emergency braking feature requires a fully charged battery on the RV. BRAKING SYSTEM The electric brakes on your RV are similar to the drum brakes on many cars and trucks.
Page 18
On the Road 4. If the brakes are not activated, check that the RV battery is connected and fully charged, and the RV brakes are properly adjusted. 5. Obtain service repair if the RV brakes do not operate after making these checks. 6.
On the Road Do not install a non-self resetting fuse in the circuit between the tow vehicle battery and the brake controller. A blown fuse would cause the controller to cease operation of both automatic and manual braking causing loss of trailer braking with possibly no advance warning.
Page 20
On the Road The total of all axle loads plus the tongue or king pin weight must not exceed the GVWR. The tires equipped on your RV are designed to carry the loads specified. Tires need to be of sufficient capacity to carry the load.
U.S. and/or Canada for braking requirements and towing regulations. If you do not have an Outdoors RV factory installed hitch receiver, towing items behind your RV or overloading the rear may void...
Page 22
On the Road 1. Weigh the RV by itself. After driving the tow vehicle and RV onto the scale disconnect the RV from the tow vehicle and move the tow vehicle off the scale. The measured weight of the loaded RV must not exceed its GVWR.
Page 23
On the Road To obtain tow vehicle individual wheel position weights: 1. Place the right front tire of the tow vehicle on the scale with RV off scale and take a weight reading. Subtract this from the weight of the front axle to get the left front tire weight. 2.
Page 24
On the Road Tire load ratings are dependent on the tire inflation pressures. Please refer to the Tire and Loading Information label on your RV for specific tire pressures. Under inflated tires can be damaged and result in loss of inflation pressures. ...
Page 25
Do not install any type of weight carrying rack, frame, or hitch to the rear bumper, A-frame assembly, chassis, or body component of the RV unless specified by Outdoors RV. Add-ons such as these may void your warranty on structural components.
On the Road SAFE DRIVING GUIDLINES Outdoors RV does not recommend transporting passengers in your RV while traveling. Your tow vehicle will have very different handling and stopping characteristics when it is towing an RV. The following guidelines will help you develop needed driving skills for safe towing.
Page 27
On the Road Use lower gears on long grades. Downshift on uphill grades to avoid overheating or undue engine loads. Downshift on downhill grades to allow engine breaking to assist in controlling vehicle speed. Avoid continuous or frequent brake application. The weight of the combination of vehicles can cause brakes to overheat and fade.
Page 28
On the Road Before backing up, you should designate a person to 'spot' you to ensure that you will not bump the RV into anything out of your field of view. In time, and with a little practice, you will be able to back your RV with little effort.
On the Road TIRE SAFETY AND INFORMATION Your RV is equipped with quality tires made by a major tire manufacturer. Under normal circumstances and with proper maintenance, you should receive thousands of miles of trouble-free service. For safety, RV stability, and maximum tire life, proper vehicle speeds and inflation pressures must be maintained. Tread depth and wear must also be monitored.
Page 30
On the Road 117/112 - This is the 'Load Index' rating. A numerical code associated with the maximum load a tire can carry at the speed indicated by its speed symbol (rating) under specified service conditions. In this instance 117=2833lbs. You will not need to be concerned with the 112 as it refers to loading in a dual wheel configuration.
Page 31
On the Road Checking Tire Pressure It is important to check your RVs tire pressure at least once a month for the following reasons: Most tires may naturally lose air over time. Tires can lose air suddenly if you drive over a pothole or other object or if you strike the curb when parking.
Page 32
If you discover abnormal wear patterns other than 'Center Wear' or 'Edge Wear', which are due to improper inflation, contact your RV dealership or Outdoors RV Service Department to discuss possible available options to correct.
Page 33
Changing a Flat Tire If you have a flat tire, Outdoors RV Mfg. recommends you call for road service. We do not suggest that you change a flat tire yourself. Changing a flat tire can be a potentially hazardous. Road service providers will have the necessary tools to change your tire quickly and safely.
Page 34
On the Road 1. Be sure the tow vehicle and RV are completely out of any traffic lane, and on solid ground or paved surface. Do not attempt to change a flat tire on soft or uneven surface. Turn on the tow vehicle emergency flashers and set up flares or warning lights and/or signs.
On the Road Wheel Nut Torque Sequence 15" x 5-Lug 16" x 8-Lug 15" x 6-Lug / 16" x 6-Lug Torque to 120 ft/lbs. Torque to 130 ft/lbs. Torque to 120 ft/lbs. WHEEL LUG NUT TORQUING Do not exceed the listed torque values for your wheel. Proper wheel lug nut torque is very important to safe and dependable trailering.
Page 36
On the Road If not properly tightened, loose lug nuts can damage the stud and/or wheels. If driven in this condition for any extended period severe wheel damage could occur affecting the handling of your RV. Use a torque wrench to tighten lug nuts. Tightening by hand or with an impact wrench is not recommended.
On the Road PRE−DEPARTURE CHECKLIST 1. Load your RV (If departing from home) - Remember to load your RV keeping in mind loading methods discussed in sections 'Loading Your RV' and 'Distributing Your Load'. Pre-chill refrigerator/freezer. Fill freshwater tank (If staying without a city water connection). ...
Page 38
On the Road 3. Do a walk-around the exterior checking these things: Retract all awnings (As equipped). Disconnect all electric, water and waste connections (If connected). Stow all cables and hoses. Verify exterior shower knobs are turned to the 'off' position. ...
Living With Your RV FIRE SAFETY The potential hazards of fire exist in all areas of life, and a recreational lifestyle is no exception. Your RV is a complex assembly made up of many materials, some of them flammable. But like most hazards, the possibility of fire can be minimized, if not totally eliminated by recognizing the danger and practicing common sense, safety, and maintenance habits.
Page 40
If your RV is damaged by fire, do not move, or use it until it has been thoroughly inspected and repaired by your dealership or Outdoors RV service facility. This may also include your insurance adjuster. Never leave unattended food cooking on the stove or in the oven.
EFFECTS OF LONG−TERM OCCUPANCY Condensation Outdoors RV Manufacturing has designed your travel trailer for recreational use and short-term occupancy. It is not designed or intended to be used as a permanent residence. If you occupy your RV for extended periods of time, be prepared to deal with condensation and humid conditions that may be encountered.
Page 42
Living With Your RV Condensation occurs naturally, just as moisture collects on the outside of a glass of cold water. During humid weather, moisture can condense on the inside surfaces of the RV during cold weather when relative humidity of the interior air is high. This condition is increased because the insulated walls of a recreational vehicle are much thinner than the walls of your house.
Page 43
Living With Your RV Humidifiers - Humidifiers are designed to put moisture into dry air, up to two pounds per hour. So in a 24 hour period, an uncontrolled humidifier can put almost 50 pounds of water into the air. House Plants - Plants give off almost as much water as you put on them.
Page 44
Living With Your RV Use a fan to keep airflow circulating inside the RV so condensation and mildew cannot form in dead air spaces. Ventilate closets and cabinets. During use in cold weather, leave cabinet and closet doors partially open to warm and ventilate the interiors of storage spaces against exterior walls.
Page 45
U.S. Environmental Protection Agency - Mold Remediation in Schools and Commercial Buildings https://www.epa.gov/sites/production/files/2014-08/documents/moldremediation.pdf Formaldehyde All materials used in the making of all Outdoors RV products are CARB (California Air Resources Board) compliant for formaldehyde. Formaldehyde is an important chemical used widely by industry to manufacture building materials and numerous household products including some paints, coatings, and cosmetics.
Page 46
Living With Your RV Formaldehyde emissions will generally decrease as products age. When products are new, higher ambient temperatures or humidity can cause increased release of formaldehyde from these products. Health Effects of Formaldehyde Formaldehyde is a colorless, pungent smelling gas that can cause watery eyes, burning sensations in the eyes and throat, nausea, wheezing and coughing, fatigue, skin rash, and difficulty breathing in some people, and severe allergic reactions.
Living With Your RV LEVELING AND STABILIZATION Leveling of your RV at the campsite is important. A level RV is not only necessary for comfort, but your refrigerator must be reasonably level in order to operate properly (See your refrigerator user guide for specific details regarding level conditions).
Page 48
Living With Your RV If your RV is equipped with electric stabilizer jacks, you will find the control switches in the forward passenger side storage compartment on the front wall. Conventional travel trailers will have these switches located behind a sliding security panel in that same forward compartment. Before traveling, be sure to slide this panel closed to prevent any potential cargo shift from activating the jacks while moving down the road.
Living With Your RV If your RV is equipped with slide-out room(s), complete the leveling and stabilization procedure before extending the rooms. Do not attempt to use the stabilizer jacks to level the RV, lift the weight of the RV, raise the tires off the ground, change a flat tire, or otherwise place all of the weight of the RV on the stabilizer jacks.
Living With Your RV Metal Blinds To lower the blind pull down on the cord slightly and move it about 45 degrees to either the left or right to release, then lower the blind to the desired height. When at the desired height, move the cord back to the vertical position and the blind will stop.
Living With Your RV DINETTE CONVERSION − (Mountain Style) Dinette shown in 'Dining Arrangement' 1. Lift table from pedestal legs. 2. Store legs below. 3. Insert table into recess. 4. Arrange cushions as shown. 5. Reverse procedure to restore dinette. SOFA CONVERSION Jack−Knife Style You will recognize the Jack-Knife sofa as not having arms at either end.
Living With Your RV Wall-Hugger Recliners The wall hugger recliners may need to be pulled away from the wall slightly to avoid rubbing. You will find the reclining levers just between the seat cushions and arm rest on either side. Additionally the center armrest opens up to provide storage for remotes, etc.
Living With Your RV Do not store flammable, volatile or hazardous chemicals inside your RV exterior storage compartments. Toxic fumes from these liquids or chemicals may enter the interior of your RV. Do not place propane cylinders inside the vehicle. Propane cylinders are equipped with safety devices that relieve excessive pressure by discharging propane into the atmosphere.
Plumbing Systems Your RV plumbing consists of two primary systems: Fresh Water (potable) and Wastewater. Each system has its own holding tank(s) including a fresh water holding tank for clean potable water while camping away from city and park water connections and black and gray waste holding tanks for containing body waste and drainage from sinks and bath shower.
Page 55
Damage caused by over filling or improper filling of the freshwater tank is considered misuse and is not covered by Outdoors RV Mfg Warranty. USE POTABLE WATER ONLY IN THE FRESH WATER SYSTEM.
Page 56
Plumbing Systems Draining the On-Board Water Tank The on-board freshwater tank has a drain valve handle similar to that of your wastewater drain system, however, is identified by having a white handle. This valve handle will be located on the driver side of your RV along the lower edge of the chassis frame.
Page 57
Plumbing Systems To drain the water lines; 1. Turn off water pump. 2. Open all hot and cold low point drains. 3. Turn on all faucets. For more complete direction on water system draining, refer to the 'Winterization' section in the 'Storage and Winterization' chapter.
Page 58
Plumbing Systems Water Pump Screen Your water pump includes a serviceable filter screen that can be removed and flushed out if it becomes clogged with debris. Note: This is merely a particle filter screen and does not provide water purification. The filter screen housing is located on the inlet side of the water pump and is made of clear plastic so that you may perform a visual check of its condition without disassembly.
Page 59
Plumbing Systems Water Heater By-Pass The water heater by-pass allows for winterization of the water system without filling the water heater tank full of anti-freeze. The by-pass valves are located on the back of the water heater (see illustrations below). Most water heater by-pass valves are accessible behind a removable cabinet panel or cabinet drawer.
Plumbing Systems Do not turn on the water heater with the by-pass valve in 'by-pass mode' without water in the water heater tank. Damage to the water heater and heating element may occur if the water heater is turned on without water in its tank.
Page 61
Plumbing Systems The drain plumbing system is very similar to that used in your home. The sinks and showers or tubs have water traps and are vented to the exterior to minimize waste gases from backing up into the RV. The components are made of ABS plastics the same as plumbing parts found in modern homes and are just as durable and resistant to most chemicals and cleaners used in the household.
Page 62
Plumbing Systems The two or three tanks are not interconnected in any way other than the final drain connection and can be drained individually through a common outlet. In order to help prevent hard deposits from building up within the black tank and help to reduce unwanted odors, it is recommended to always keep a small amount of water in the black tank.
Page 63
Plumbing Systems IMPORTANT: Do not pull the holding tank drain valves open while the protective cap is attached to the drain outlet. Do not attempt to drain both waste holding tanks at the same time. Always drain the waste holding tanks into an acceptable sewer inlet or dump station. 1.
Plumbing Systems Sewer drain cap must always be securely in place while the vehicle is in motion. Local or state regulations may prohibit highway travel unless the holding tank outlet is securely capped. Do not leave the RV unattended during the tank flushing process. Make sure the black tank termination valve is open and your sewer hose connected to an approved dump station.
Page 65
Plumbing Systems Most hose and tubing connections at fittings use a specialized clamp. In an emergency you may be able to tighten up a fitting connection leak with a standard automotive worm gear hose clamp however you will want to have it repaired with the proper clamp by your dealership at your earliest convenience. Spare water line fitting seals and a few hose clamps would be a great addition to your RV toolbox.
Electrical Systems To provide you with the safest possible product, the electrical systems in your RV have been designed using materials and assembly methods that meet or exceed all applicable codes, regulations, and standards in effect at the time that it was manufactured. There are two basic electrical systems in your RV: 120 Volt AC, and 12 Volt DC.
Page 67
Electrical Systems 50-Amp Power Service 50-amp service provides for more electrical capacity and usage at one time than that of 30-amp service. With this service you will be able to run all 120-volt appliances simultaneously without switching the microwave and fireplace (if equipped). 50-amp service will also allow for a second air conditioner to be installed in the bedroom and run at the same time as the primary air conditioner in the living room.
Page 68
Electrical Systems The 12-volt DC circuits are protected by an ATC Type 257 fuse. If you are experiencing continuously blown fuses, do not attempt to 'fix' the problem by installing a larger amperage fuse. Continuously blowing fuses indicates that there is a shorted or grounded hot wire or overloaded circuit and must be immediately corrected.
Page 69
Electrical Systems Adapters and Extension Cords In certain circumstances electrical adapters can be used to make the shoreline power connection when necessary, however when using adapters your available AC power for the entire RV is reduced to the rating of the adapter. For example an RV wired with 50-amp service panel will be reduced to 30-amp service.
RESET button. Reset if necessary. If the GFCI continues to trip, have the RV electrical system checked at an authorized Outdoors RV dealer or by a qualified electrician. The GFCI may have reached the end of its life expectancy.
Page 71
Electrical Systems Certain model RVs may be equipped with reverse back-up lighting which will connect to the Center Auxiliary #7 connection with a 14-gauge yellow wire. Disregard this connection if your RV is not equipped with back-up lights. Be certain that your installation includes a charge line from the tow vehicle alternator or battery with a battery isolator solenoid using a minimum 10 AWG stranded copper wire (rated appropriately for under-hood temperatures) to the Battery Charge #4 connection.
Electrical Systems Battery Disconnect Switch The battery disconnect switch allows for 12-volt power to be disconnected from the RV batteries. This switch is located inside the exterior storage compartment on the passenger side behind an access panel in the front wall (See picture below for identification). Fifth-wheel models will be located just inside the passenger side exterior storage compartment on the forward wall.
Page 73
Electrical Systems Battery Selection and Installation Your RV has been designed to install up to two 12-volt Group 27 batteries (without box) or two 6-volt GC2 batteries in the standard battery rack and up to four 6-volt GC2 batteries if your RV is equipped with the expanded capacity battery tray.
C (Charge = 12.7 volts or greater). SOLAR Outdoors RV travel trailers and fifth wheels are equipped with different levels of solar capabilities. All models include an exterior solar jack installed at the passenger side toward the front of the RV. Its design is such that you may purchase a portable solar panel kit that may sit on the ground or table and plug into the exterior jack.
LED light does burn out, the entire light fixture must be replaced. Please contact your dealership or Outdoors RV for replacement. The fuses in your RV power center are an automotive ATC type and can be found at any auto parts store as well as most department stores.
Propane System Propane, also known as Liquid Petroleum Gas (LPG) is a clean burning dependable fuel for operating all gas appliances when utilized properly. Propane is supplied from the LP tanks on the tongue of your RV to operate your range, oven, furnace, and LP Gas generator (if equipped) and is an alternate energy source for your refrigerator and water heater.
Page 77
Propane System Because of the potentially dangerous nature of propane gas the following warnings and advisories are provided to ensure your safety. Please read and understand the importance of each. Propane cylinders are equipped with safety devices that relieve excessive pressure by discharging propane to the atmosphere.
Propane System Propane System Advisory Never check for leaks with an open flame. Use an approved leak detection solution or a non- ammoniated, non-chlorinated soap solution only. Always be careful when drilling holes or fastening objects to the trailer. The propane supply lines could become punctured by a nail or screw.
Page 79
Propane System Propane Regulator with Automatic Changeover The regulator and auto-changeover (see picture below) is a unitized device located between the LP tanks that control the flow of LP gas to the appliances. The auto-changeover will allow a continuous uninterrupted flow of LP gas to the system. When the first tank is empty the auto-switchover will automatically switch to the second tank without service interruption.
Page 80
Propane System Regulator Freeze-Up Freezing and frosting of the propane regulator is quite common in extremely cold climates and usually nothing to be concerned about provided everything is in working order and operating as it should. While this 'freezing' of the regulator may be a symptom of an actual problem, it usually is a sign that outside humidity is at a level capable of producing condensation.
Propane System When using this outdoor cooking area, the vehicle must be level and stabilized. Do not violate manufacturers' instructions on required clearances for cooking appliances during use. Do not store cooking appliances until cool to the touch. ...
Propane System It is recommended that your new LP tanks be purged at their first filling. If a container is suspected of being depressurized or open to the atmosphere for a period of time it should be re-purged as if it were a new container.
Page 83
Propane System IF THE ALARM SOUNDS... 1. Extinguish any open flames and all smoking materials. 2. Shut off the propane supply at the container valve(s) or propane supply connection. 3. Do not touch electrical switches. 4. Open doors and other ventilating openings. 5.
Propane System LIGHTING PROPANE APPLIANCES Detailed operating instruction manuals for propane appliances are included in your owner information packet. Please read these manuals for specific operating instructions. Always follow the appliance manufacturer's lighting, operating and maintenance instructions. Air trapped in the propane lines may delay the initial lighting of any appliance. It could take several seconds or minutes for the propane to reach the appliance.
In the event that your appliance operation manual is missing, you may download it from the manufacturers' website or contact Outdoors RV or your RV dealership. ~ Please read and understand the following safety warnings prior to operating any LP gas cooking appliance.
Appliances and Equipment FURNACE The furnace installed in your RV is an LP gas appliance. Carefully read the manufacturer's user manual for complete operational and safety instructions provided in your owner information packet prior to using the furnace. The furnace utilizes a sealed combustion system, which means the combustion chamber is completely sealed from the inner atmosphere of your RV.
Appliances and Equipment WATER PUMP Carefully read the manufacturer's literature for complete operational instructions provided in your owner information packet prior to using your water pump. Refer to section 'Water Pump' in the 'Plumbing Systems' chapter of this manual for basic operation. REFRIGERATOR Your refrigerator is a 2-way combination LP gas/120V electric appliance that can be operated in either mode depending on your camping environment.
Appliances and Equipment FIREPLACE (If Equipped) Your fireplace (if equipped) is powered by 120V through the power distribution center. It is fused by a 15-amp re-settable household type breaker. Carefully read the manufacturer's user manual for complete operational and safety instructions provided in your owner information packet prior to using. If your RV is equipped with an electric fireplace and 30-amp service, the microwave and fireplace will be switched so that only one or the other appliance can be operated at one time.
Appliances and Equipment THERMOSTAT The thermostat in your RV controls functions of both the furnace and air conditioner. Carefully read the manufacturer's literature for complete operating instructions provided in your owner information packet prior to using. TV / STEREO ANTENNA The TV antenna on your RV is a combined unit that provides signal for both the TV and stereo.
Page 90
Appliances and Equipment The following diagrams identify the necessary connections for each viewing option. This connection provides the This connection is satellite signal used to rout a from the exterior satellite signal from 'DSS' connection the 'Satellite' and will connect connection on the to your receiver wall plate at the left...
RV) TELEVISIONS Outdoors RV equips travel trailers with many different sizes and brands of television sets including 120V and 12V powered, and some with internal DVD players. Please refer to the manufacturer’s manuals included in your owner information packet for specific care and operating instructions.
POWER ROOF VENTS Three variations of 12V power roof vents are installed in Outdoors RV travel trailers. Your model may not include all variations. Currently offered are the Maxx-fan with remote (reversible fan), Maxx-fan with wall switch (non-reversible fan), and the standard exhaust only fan.
6. Failure to follow these operating instructions could result in voiding your warranty. MONITOR PANEL Multiple styles of monitor panels are installed in Outdoors RV products. Some include very basic functionality while others include additional equipment switching. They will all include holding tank full capacities (fresh water, gray and black waste) and battery charge status.
Page 94
Appliances and Equipment Carefully read the manufacturer's literature provided in your owner information packet for complete operating instructions prior to using. Please read and understand the following safety warnings before using your RV. This CO alarm will only indicate the presence of carbon monoxide gas at the sensor.
Conventional A-frame models are equipped with a folding bumper mount spare tire carrier. By removing the locking pin the carrier may be lowered to allow access to any service compartment that may be behind. Outdoors RV does not provide a specific wrench or socket for removing your spare tire from its carrier.
SLIDE-OUT ROOM Outdoors RV utilizes two different style slide-out mechanisms (not all models have slide-out rooms). One style is a 'Ram' system and consists of two ram mechanisms that are driven by a single 12V motor with drive shafts on each side. This system is located within the chassis structure. The other is an 'In- Wall' system that is mounted in the sidewall of the RV and is operated by two 12V motors at each upper corner of the wall opening.
Page 97
Appliances and Equipment Check for standing water or ice on the roof (if not equipped with slide topper). Remember that the slide- out seals are not designed to remove all of the water or debris that may accumulate on the exterior surfaces.
Page 98
Appliances and Equipment Brake lever spring Override lever 12-volt motor connections Brake lever spring Override lever Override adapter Override adapter FIGURE 2 FIGURE 1 In-Wall System Override The Schwintek In-Wall slide system can be manually overridden in two different methods depending on the malfunction.
Appliances and Equipment Motor Disengagement Method 1. Remove motor retention screws. These screws will be found underneath the exterior seal located near the top of each vertical column on the outside of the RV. 2. Locate motor. At the top of each column you will see the motor through a slot on the inside of the RV.
Appliances and Equipment TONGUE JACK Your RV is equipped with an electric jack with a built-in hitch light feature. Refer to 'Leveling and Stabilization' in the 'Living With Your RV' chapter for basic operation. Additional product literature can be found in your owner information packet. MANUAL STABILIZER JACKS Your RV may be equipped with manual stabilizer jacks.
Appliances and Equipment FLOW-LONGER LP-GAS LINE TAP KIT Your RV includes a LP gas line kit that provides a non-regulated connection on one LP tank. With this kit you may connect portable LP gas appliances that are fueled by disposable gas cylinders. Keep in mind that because the connection for this kit is attached to only one LP tank that you must have the LP tank selector knob pointing to the tank that has this kits outlet fitting attached to.
Storage and Winterization STORAGE CHECKLISTS The following checklists will help you perform the steps necessary to prepare your RV for the storage conditions you may anticipate. These checklists do not include every detail required and are not listed in any particular order. Additionally you may want to expand on them to suit your needs. See pertaining chapters in this manual for specific details.
Storage and Winterization Long-Term Storage (Over 60 days) 1. Perform all steps as required for short-term storage. 2. Operate air conditioner to lubricate compressor seals. 3. Remove and clean or replace (if damaged) air conditioner filter. Cover the air conditioner exterior shroud to prevent insect nest build-up.
Page 104
Storage and Winterization Water System Winterizing Read this section completely before performing water system winterization. Draining the water system alone may not provide adequate cold weather protection. If your RV is to be unheated during below freezing temperatures, you must perform the following winterization procedures.
If you did not, and freeze damage or other deterioration has occurred, please contact any authorized Outdoors RV dealer for advice. 1. Thoroughly inspect the outside of the RV. Look for animal nests around wheel wells and any other 'nook and cranny' areas.
Page 106
Storage and Winterization 16. Inspect the AC power cord, converter, and all outlets especially exterior patio and refrigerator outlets. 17. Inspect any exposed wiring underneath including slide-out room power cords (if equipped) for potential rodent damage. Have repaired as necessary. 18.
Maintenance Your RV has been designed to provide you with many years of use with a minimum amount of maintenance. This chapter will familiarize you with the areas of your RV that require scheduled care. Time spent taking care of your RV on a regular basis will pay for itself in extended service and will help protect your investment.
Page 108
Maintenance These materials, if left in contact with polyester, may attack or change the color. Any cleaner that is used should be in contact with the polyester the minimum amount of time required to do the job. All cleaners are meant to attack dirt and remove it. The longer they remain in contact past the recommended time frame, the more they can potentially attack the finish.
Page 109
Maintenance Physical damage to fiberglass should be addressed immediately to avoid moisture entering through breaks and causing problems with interior walls and components. Cover breaks in the fiberglass with plastic, sealing the edges with tape until proper repairs can be made. Exterior Graphic Care The pressure sensitive graphics installed on the exterior surface of your RV require very little maintenance and should be treated similarly to a painted surface.
Page 110
RV and can recommend the appropriate sealants for you if you prefer to do the work yourself. Always use sealants recommended by your dealer or Outdoors RV. Remember that any work performed by your dealer creates documentation that may be required for potential warranty work in the future.
Page 111
Maintenance Resealing Roof Components Inspect roof vents, roof top moldings, and all other roof component seals. Refer to roof sealant literature included in your owner information packet for specific instructions on maintaining your roof sealants. Also check the air conditioner rubber seal between the roof and air conditioner to verify that it is still slightly compressed with no signs of cracking or gapping.
Page 112
Maintenance All Outdoor RV products are equipped with self-adjusting, electric drum brakes. No parking brake is provided with this system. All axles are equipped with E-Z Lube hub covers allowing for simplified maintenance between bearing inspection periods. Use caution if greasing bearings with this feature. When pumping grease into the bearings you should see old grease returning out through the hole in the hub cover.
Maintenance Contacts and terminals can be wire brushed or 'refreshed' with fine sandpaper. Battery terminals, after cleaning, can be sprayed with a corrosion preventative coating to reduce future build-up. The breakaway switch has an O-ring seal preventing dirt and moisture from entering the contact area. If when inspecting its operation you discover moisture, dirt, or particles inside behind the seal it is recommended that the switch be replaced.
Page 114
Maintenance 1. Read the label and follow the manufacturer’s instructions. Only use cleaners that are specifically recommended for fiberglass as detailed on the label of the cleaning product. Use of cleaners not designed for gel coated surfaces could be damaging. Cleaners specifically formulated for use on wood or teak normally are not appropriate for fiberglass.
MAINTENANCE SCHEDULE Pre- After Weekly Every Every 3 Every 6 Each At Specified Mileage Maintenance Item Trip Month Months Months Year or Interval Inspect Safety Chains Inspect 7-Way Cord Connection (Truck and Trailer) Inspect AC Power Cord Inspect Hitch Components (Truck) Inspect Chassis For Rust and Damage - Paint Touch-Up Check Pin Box Assembly Bolt Torques Inspect Pin Box King Pin For Excessive Wear...
Page 116
MAINTENANCE AND REPAIR LOG Date Maintenance / Service Procedure Service Center Name / Address / Phone...
The RV Tool Box The following is a list of commonly carried items you may choose to include in your RV toolbox. This list is primarily intended for the first time RV'er. Water pressure regulator for city water inlet. ...
Need help?
Do you have a question about the Mountain Series and is the answer not in the manual?
Questions and answers