OPTi 750/8536 Assembly & User Instructions page 2

Assemble Instructions
Continue to build the frame using tubes 3 to 6
again remember to thread the net throught the
top and bottom post uprights (3 & 4) also the
bottom curve and middle straight (1 & 2) at the
rear on the oor.
Ensure all button clips are seated and secure.
Pre-assemble the top and bottom back curves to the rear
connecting tubes(7 & 8). Then insert this assembly from the front
of the goal, which will push out the net to form the goal shape.
Secure the top back curve (7) to the top post upright (3) using the
screw set (A) Bolt, washer and wingnut as a shown.
Repeat for opposite side.
fl
489 - 499 Avebury Boulevard
Central Milton Keynes
Secure the bottom back curve (9) using the screw set (A)
throught the two holes in the bottom curve (1) and bottom
end L/H (5). The repeat opperation for the right hand side
of the goal.
Argos Ltd
MK9 2NW
Made in China
2 2