Charging
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for trimming is 15 °C to
35 °C. Do not expose the appliance to temperatures higher than 50 °C for
extended periods of time.
• Connect the appliance via the special cord set (6) to an electrical outlet
with the motor switched off.
• A full charge takes approx. 10 hours and provides up to 40 minutes of
cordless operation time.
• The charging indicator (7) in the special cord set lights up continuously
when the appliance is being charged.
• Once the appliance is completely charged, discharge it through normal
use. Then recharge again to full capacity.
Trimming
• Click the precision comb (1) onto the trimmer head (2).
• Turn the length selector (3) to your desired cutting length. The comb
slides automatically up or down.
• Length settings precision comb (1): 1 to 10 mm in 0,5 mm steps
• Slide the on/off switch up to turn the appliance on.
• Trim against hair growth by guiding the flat comb part over the skin.
• Avoid clogging the comb with hair. Remove and clean it from time to time.
• For shaping sideburns, moustaches and partial short beards, take off the
precision comb.
Cleaning and maintenance
• Switch off the appliance.
• Take off the comb and the trimmer head.
• Use the brush to clean the head, comb and the appliance.
• The removed head and comb can be cleaned under running water.
Let them dry completely before reattaching them.
• To keep the trimmer working properly, oil it with light machine oil (not
included) regularly.
9
Need help?
Do you have a question about the 5516 and is the answer not in the manual?
Questions and answers
My trimmer head is not working the lower part of trimmer is working motor is working but upper part of trimmer where the spring is located it's not working trimmer 5517